On AST2700, the RMII/RGMII pin strap is configured by setting
MAC 0x50 bit 20. Set to 0 is RGMII and set to 1 is RMII.
Use compatible property to distinguish different generations for
configuration.
Signed-off-by: Jacky Chou <jacky_chou@xxxxxxxxxxxxxx>
---
drivers/net/ethernet/faraday/ftgmac100.c | 5 +++++
drivers/net/ethernet/faraday/ftgmac100.h | 1 +
2 files changed, 6 insertions(+)
diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c
index 6dfd29505d2c..bd57942b8b16 100644
--- a/drivers/net/ethernet/faraday/ftgmac100.c
+++ b/drivers/net/ethernet/faraday/ftgmac100.c
@@ -323,6 +323,7 @@ static void ftgmac100_init_hw(struct ftgmac100 *priv)
static void ftgmac100_start_hw(struct ftgmac100 *priv)
{
u32 maccr = ioread32(priv->base + FTGMAC100_OFFSET_MACCR);
+ struct phy_device *phydev = priv->netdev->phydev;
/* Keep the original GMAC and FAST bits */
maccr &= (FTGMAC100_MACCR_FAST_MODE | FTGMAC100_MACCR_GIGA_MODE);
@@ -351,6 +352,10 @@ static void ftgmac100_start_hw(struct ftgmac100 *priv)
if (priv->netdev->features & NETIF_F_HW_VLAN_CTAG_RX)
maccr |= FTGMAC100_MACCR_RM_VLAN;
+ if (of_device_is_compatible(priv->dev->of_node, "aspeed,ast2700-mac") &&
+ phydev && phydev->interface == PHY_INTERFACE_MODE_RMII)
+ maccr |= FTGMAC100_MACCR_RMII_ENABLE;
+
/* Hit the HW */
iowrite32(maccr, priv->base + FTGMAC100_OFFSET_MACCR);
}
diff --git a/drivers/net/ethernet/faraday/ftgmac100.h b/drivers/net/ethernet/faraday/ftgmac100.h
index 4968f6f0bdbc..c87aa7d7f14c 100644
--- a/drivers/net/ethernet/faraday/ftgmac100.h
+++ b/drivers/net/ethernet/faraday/ftgmac100.h
@@ -166,6 +166,7 @@
#define FTGMAC100_MACCR_RX_MULTIPKT (1 << 16)
#define FTGMAC100_MACCR_RX_BROADPKT (1 << 17)
#define FTGMAC100_MACCR_DISCARD_CRCERR (1 << 18)
+#define FTGMAC100_MACCR_RMII_ENABLE (1 << 20) /* defined in ast2700 */
#define FTGMAC100_MACCR_FAST_MODE (1 << 19)
#define FTGMAC100_MACCR_SW_RST (1 << 31)
--
2.25.1
