On 11/19/24 7:58 PM, Cedric Encarnacion wrote: > ADP1051: 6 PWM for I/O Voltage, I/O Current, Temperature > ADP1055: 6 PWM for I/O Voltage, I/O Current, Power, Temperature > LTP8800-1A/-2/-4A: 150A/135A/200A DC/DC µModule Regulator > > The LTP8800 is a family of step-down μModule regulators that provides > microprocessor core voltage from 54V power distribution architecture. > LTP8800 features telemetry monitoring of input/output voltage, input > current, output power, and temperature over PMBus. > > Co-developed-by: Alexis Czezar Torreno <alexisczezar.torreno@xxxxxxxxxx> > Signed-off-by: Alexis Czezar Torreno <alexisczezar.torreno@xxxxxxxxxx> > Signed-off-by: Cedric Encarnacion <cedricjustine.encarnacion@xxxxxxxxxx> > --- > Documentation/hwmon/adp1050.rst | 63 +++++++++++++++++++++++++++-- > drivers/hwmon/pmbus/Kconfig | 9 +++++ > drivers/hwmon/pmbus/adp1050.c | 72 +++++++++++++++++++++++++++++++-- > 3 files changed, 137 insertions(+), 7 deletions(-) > > diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig > index f6d352841953..5d03a307824e 100644 > --- a/drivers/hwmon/pmbus/Kconfig > +++ b/drivers/hwmon/pmbus/Kconfig > @@ -67,6 +67,15 @@ config SENSORS_ADP1050 > This driver can also be built as a module. If so, the module will > be called adp1050. > > +config SENSORS_ADP1050_REGULATOR > + bool "Regulator support for ADP1050 and compatibles" > + depends on SENSORS_ADP1050 && REGULATOR > + help > + If you say yes here you get regulator support for Analog Devices > + LTP8800-1A, LTP8800-4A, and LTP8800-2. LTP8800 is a family of DC/DC > + µModule regulators that can provide microprocessor power from 54V > + power distribution architecture. > + > config SENSORS_BEL_PFE > tristate "Bel PFE Compatible Power Supplies" > help FYI: The 'micro' symbol displays as a blank space in 'menuconfig' or 'nconfig'. (It shows up correctly in gconfig and xconfig.) This problem is not unique to this driver entry. See https://lore.kernel.org/all/20231006202942.GA865945@bhelgaas/ from 2023. AFAIK no one is working on this issue. Feel free to change the help text or leave it... -- ~Randy
