On Tue, 19 Nov 2024 23:12:46 +0100, Niklas Söderlund wrote:
> Each data lane on a CSI-2 C-PHY bus uses three phase encoding and is
> constructed from three physical wires. The wires are referred to as A, B
> and C and their default order is ABC. However to ease hardware design
> the specification allows for the wires to be switched in any order.
>
> Add a vendor neutral property to describe the line order used. The
> property name 'line-orders', the possible values it can be assigned and
> there names are taken from the MIPI Discovery and Configuration (DisCo)
> Specification for Imaging.
>
> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
> ---
> .../bindings/media/video-interfaces.yaml | 20 +++++++++++++++++++
> include/dt-bindings/media/video-interfaces.h | 7 +++++++
> 2 files changed, 27 insertions(+)
>
My bot found errors running 'make dt_binding_check' on your patch:
yamllint warnings/errors:
dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/video-interfaces.yaml: properties:line-orders: 'enum' should not be valid under {'enum': ['const', 'enum', 'exclusiveMaximum', 'exclusiveMinimum', 'minimum', 'maximum', 'multipleOf', 'pattern']}
hint: Scalar and array keywords cannot be mixed
from schema $id: http://devicetree.org/meta-schemas/keywords.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/video-interfaces.yaml: properties:line-orders: 'enum' should not be valid under {'enum': ['const', 'enum', 'exclusiveMaximum', 'exclusiveMinimum', 'minimum', 'maximum', 'multipleOf', 'pattern']}
hint: Scalar and array keywords cannot be mixed
from schema $id: http://devicetree.org/meta-schemas/keywords.yaml#
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20241119221249.539610-2-niklas.soderlund+renesas@xxxxxxxxxxxx
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
