On 15/11/2024 15:58, Niko Pasaloukos wrote: > Add support for the Blaize CB2 development board based on > the BLZP1600 SoC. This consists of a Carrier-Board-2 and a > System-on-Module. > > Both BLZP1600 SoM and CB2 are available as products. > CB2 (Pathfinder) has multiple peripherals like UART, I2C, > SPI, GPIO, CSI (camera), DSI (display), USB-3.0 and Ethernet. > > Enable support for the Cryptocell, UART and I2C which are > already fully supported by the drivers. > > The blaize-blzp1600.dtsi is the common part for the SoC, > blaize-blzp1600-som.dtsi is the common part for the SoM and > blaize-blzp1600-cb2.dts is the board specific file. > > Co-developed-by: James Cowgill <james.cowgill@xxxxxxxxxx> > Signed-off-by: James Cowgill <james.cowgill@xxxxxxxxxx> > Co-developed-by: Matt Redfearn <matt.redfearn@xxxxxxxxxx> > Signed-off-by: Matt Redfearn <matt.redfearn@xxxxxxxxxx> > Co-developed-by: Neil Jones <neil.jones@xxxxxxxxxx> > Signed-off-by: Neil Jones <neil.jones@xxxxxxxxxx> > Signed-off-by: Nikolaos Pasaloukos <nikolaos.pasaloukos@xxxxxxxxxx> Subject prefix should be: arm64: dts: or arm64: dts: blaize: Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> Best regards, Krzysztof
