Hello,
this series fixes some problems found in the lxa-tac generation 1 and
2 boards and add support for the generation 3 board. It's based on an
STM32MP153c, while the generation 1 and 2 are based on the
STM32MP157c.
regards,
Marc
Signed-off-by: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
---
Leonard Göhrs (6):
ARM: dts: stm32: lxa-tac: disable the real time clock
ARM: dts: stm32: lxa-tac: extend the alias table
ARM: dts: stm32: lxa-tac: adjust USB gadget fifo sizes for multi function
dt-bindings: arm: stm32: add compatible strings for Linux Automation LXA TAC gen 3
ARM: dts: stm32: lxa-tac: move adc and gpio{e,g} to gen{1,2} boards
ARM: dts: stm32: lxa-tac: Add support for generation 3 devices
.../devicetree/bindings/arm/stm32/stm32.yaml | 7 +
arch/arm/boot/dts/st/Makefile | 1 +
arch/arm/boot/dts/st/stm32mp153c-lxa-tac-gen3.dts | 267 +++++++++++++++++++++
arch/arm/boot/dts/st/stm32mp157c-lxa-tac-gen1.dts | 84 +++++++
arch/arm/boot/dts/st/stm32mp157c-lxa-tac-gen2.dts | 84 +++++++
arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi | 100 +-------
6 files changed, 455 insertions(+), 88 deletions(-)
---
base-commit: b0191a5cbc222fc7af3f9511b44d1f330ef980e9
change-id: 20241112-lxa-tac-gen3-8dbc3481ce7a
Best regards,
--
Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
