Re: [PATCH v1 05/10] media: platform: mediatek: add isp_7x camsys unit

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi, Shu-hsiang:

On Wed, 2024-10-16 at 11:43 +0800, CK Hu wrote:
> Hi, Shu-hsiang:
> 
> On Wed, 2024-10-09 at 19:15 +0800, Shu-hsiang Yang wrote:
> > Introduces the top media device driver for the MediaTek ISP7X CAMSYS.
> > The driver maintains the camera system, including sub-device management,
> > DMA operations, and integration with the V4L2 framework. It handles
> > request stream data, buffer management, and MediaTek-specific features,
> > and pipeline management, streaming control, error handling mechanism.
> > Additionally, it aggregates sub-drivers for the camera interface, raw
> > and yuv pipelines.
> > 
> > Signed-off-by: Shu-hsiang Yang <Shu-hsiang.Yang@xxxxxxxxxxxx>
> > ---
> 
> [snip]
> 
> > +static int mtk_cam_probe(struct platform_device *pdev)
> > +{
> > +	struct mtk_cam_device *cam_dev;
> > +	struct device *dev = &pdev->dev;
> > +	struct resource *res;
> > +	int ret;
> > +	unsigned int i;
> > +
> > +	dev_dbg(dev, "camsys | start %s\n", __func__);
> > +
> > +	/* initialize structure */
> > +	cam_dev = devm_kzalloc(dev, sizeof(*cam_dev), GFP_KERNEL);
> > +	if (!cam_dev)
> > +		return -ENOMEM;
> > +
> > +	if (dma_set_mask_and_coherent(dev, DMA_BIT_MASK(34))) {
> > +		dev_err(dev, "%s: No suitable DMA available\n", __func__);
> > +		return -EIO;
> > +	}
> > +
> > +	if (!dev->dma_parms) {
> > +		dev->dma_parms =
> > +			devm_kzalloc(dev, sizeof(*dev->dma_parms), GFP_KERNEL);
> > +		if (!dev->dma_parms)
> > +			return -ENOMEM;
> > +	}
> > +
> > +	dma_set_max_seg_size(dev, UINT_MAX);
> > +
> > +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > +	if (!res) {
> > +		dev_err(dev, "failed to get mem\n");
> > +		return -ENODEV;
> > +	}
> > +
> > +	cam_dev->base = devm_ioremap_resource(dev, res);
> 
> I can not find any where to write register of this device.
> If so, I think we need not to probe this driver.
> The rest software control can be setup by other driver.

Ignore my previous comment. I find you need to power on/off this device.
So this probe is necessary.

Regards,
CK

> 
> Regards,
> CK
> 
> > +	if (IS_ERR(cam_dev->base)) {
> > +		dev_err(dev, "failed to map register base\n");
> > +		return PTR_ERR(cam_dev->base);
> > +	}
> > +
> > +	cam_dev->dev = dev;
> > +	dev_set_drvdata(dev, cam_dev);
> > +
> > +	cam_dev->composer_cnt = 0;
> > +	cam_dev->num_seninf_devices = 0;
> > +
> > +	cam_dev->max_stream_num = MTKCAM_SUBDEV_MAX;
> > +	cam_dev->ctxs = devm_kcalloc(dev, cam_dev->max_stream_num,
> > +				     sizeof(*cam_dev->ctxs), GFP_KERNEL);
> > +	if (!cam_dev->ctxs)
> > +		return -ENOMEM;
> > +
> > +	cam_dev->streaming_ctx = 0;
> > +	for (i = 0; i < cam_dev->max_stream_num; i++)
> > +		mtk_cam_ctx_init(cam_dev->ctxs + i, cam_dev, i);
> > +
> > +	cam_dev->running_job_count = 0;
> > +	spin_lock_init(&cam_dev->pending_job_lock);
> > +	spin_lock_init(&cam_dev->running_job_lock);
> > +	INIT_LIST_HEAD(&cam_dev->pending_job_list);
> > +	INIT_LIST_HEAD(&cam_dev->running_job_list);
> > +
> > +	cam_dev->dma_processing_count = 0;
> > +	spin_lock_init(&cam_dev->dma_pending_lock);
> > +	spin_lock_init(&cam_dev->dma_processing_lock);
> > +	INIT_LIST_HEAD(&cam_dev->dma_pending);
> > +	INIT_LIST_HEAD(&cam_dev->dma_processing);
> > +
> > +	mutex_init(&cam_dev->queue_lock);
> > +
> > +	pm_runtime_enable(dev);
> > +
> > +	ret = mtk_cam_of_rproc(cam_dev, pdev);
> > +	if (ret)
> > +		goto fail_destroy_mutex;
> > +
> > +	ret = register_sub_drivers(dev);
> > +	if (ret) {
> > +		dev_err(dev, "fail to register_sub_drivers\n");
> > +		goto fail_destroy_mutex;
> > +	}
> > +
> > +	/* register mtk_cam as all isp subdev async parent */
> > +	cam_dev->notifier.ops = &mtk_cam_async_nf_ops;
> > +	v4l2_async_nf_init(&cam_dev->notifier, &cam_dev->v4l2_dev);
> > +	ret = mtk_cam_async_subdev_add(dev); /* wait all isp sub drivers */
> > +	if (ret) {
> > +		dev_err(dev, "%s failed mtk_cam_async_subdev_add\n", __func__);
> > +		goto fail_unregister_sub_drivers;
> > +	}
> > +
> > +	ret = v4l2_async_nf_register(&cam_dev->notifier);
> > +	if (ret) {
> > +		dev_err(dev, "%s async_nf_register ret:%d\n", __func__, ret);
> > +		v4l2_async_nf_cleanup(&cam_dev->notifier);
> > +		goto fail_unregister_sub_drivers;
> > +	}
> > +
> > +	ret = mtk_cam_debug_fs_init(cam_dev);
> > +	if (ret < 0)
> > +		goto fail_unregister_async_nf;
> > +
> > +	dev_info(dev, "camsys | [%s] success\n", __func__);
> > +
> > +	return 0;
> > +
> > +fail_unregister_async_nf:
> > +	v4l2_async_nf_unregister(&cam_dev->notifier);
> > +
> > +fail_unregister_sub_drivers:
> > +	unregister_sub_drivers(dev);
> > +
> > +fail_destroy_mutex:
> > +	mutex_destroy(&cam_dev->queue_lock);
> > +
> > +	return ret;
> > +}
> > +




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux