Add support for primary USB controller on QCS615.
Signed-off-by: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/qcs615.dtsi | 110 +++++++++++++++++++++++++++
1 file changed, 110 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/qcs615.dtsi b/arch/arm64/boot/dts/qcom/qcs615.dtsi
index 590beb37f441..e676e76a337e 100644
--- a/arch/arm64/boot/dts/qcom/qcs615.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs615.dtsi
@@ -397,6 +397,11 @@ qfprom: efuse@780000 {
reg = <0x0 0x00780000 0x0 0x7000>;
#address-cells = <1>;
#size-cells = <1>;
+
+ qusb2_hstx_trim: hstx-trim@1f8 {
+ reg = <0x1fb 0x1>;
+ bits = <1 4>;
+ };
};
qupv3_id_0: geniqup@8c0000 {
@@ -758,6 +763,111 @@ rpmhpd_opp_turbo_l1: opp-9 {
};
};
};
+
+ usb_1_hsphy: phy@88e2000 {
+ compatible = "qcom,qcs615-qusb2-phy";
+ reg = <0x0 0x88e2000 0x0 0x180>;
+
+ clocks = <&gcc GCC_AHB2PHY_WEST_CLK>, <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "cfg_ahb", "ref";
+
+ resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+ nvmem-cells = <&qusb2_hstx_trim>;
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ usb_qmpphy: phy@88e6000 {
+ compatible = "qcom,qcs615-qmp-usb3-phy";
+ reg = <0x0 0x88e6000 0x0 0x1000>;
+
+ clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+ <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
+ <&gcc GCC_AHB2PHY_WEST_CLK>,
+ <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+ clock-names = "aux",
+ "ref",
+ "cfg_ahb",
+ "pipe";
+
+ resets = <&gcc GCC_USB3_PHY_PRIM_SP0_BCR>,
+ <&gcc GCC_USB3PHY_PHY_PRIM_SP0_BCR>;
+ reset-names = "phy", "phy_phy";
+
+ qcom,tcsr-reg = <&tcsr 0xb244>;
+
+ clock-output-names = "usb3_phy_pipe_clk_src";
+ #clock-cells = <0>;
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ usb_1: usb@a6f8800 {
+ compatible = "qcom,qcs615-dwc3", "qcom,dwc3";
+ reg = <0 0x0a6f8800 0 0x400>;
+
+ clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+ <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+ <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+ <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+ <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB3_PRIM_CLKREF_CLK>;
+ clock-names = "cfg_noc",
+ "core",
+ "iface",
+ "sleep",
+ "mock_utmi",
+ "xo";
+
+ assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+ assigned-clock-rates = <19200000>, <200000000>;
+
+ interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 9 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 8 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 6 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pwr_event",
+ "hs_phy_irq",
+ "dp_hs_phy_irq",
+ "dm_hs_phy_irq",
+ "ss_phy_irq";
+
+ power-domains = <&gcc USB30_PRIM_GDSC>;
+ required-opps = <&rpmhpd_opp_nom>;
+
+ resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ status = "disabled";
+
+ usb_1_dwc3: usb@a600000 {
+ compatible = "snps,dwc3";
+ reg = <0 0x0a600000 0 0xcd00>;
+
+ iommus = <&apps_smmu 0x140 0x0>;
+ interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+
+ phys = <&usb_1_hsphy>, <&usb_qmpphy>;
+ phy-names = "usb2-phy", "usb3-phy";
+
+ snps,dis-u1-entry-quirk;
+ snps,dis-u2-entry-quirk;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_enblslpm_quirk;
+ snps,has-lpm-erratum;
+ snps,hird-threshold = /bits/ 8 <0x10>;
+ snps,usb3_lpm_capable;
+ };
+ };
};
arch_timer: timer {
--
2.34.1
