Enable host mode JH7110 on-chip USB for Pine64 Star64 by setting host mode and connect vbus pinctrl. This functionality depends on setting the USB over-current register to disable at bootloader phase, for example U-Boot: https://patchwork.ozlabs.org/project/uboot/patch/20241012031328.4268-6-minda.chen@xxxxxxxxxxxxxxxx/ If the over-current register is not prepared for us then the result is no change in functional outcome with this patch applied; there is an error visible to the user and this usb configuration fails (same as it is now). Changes since v1: - Rebase on linux-next/master - use tabs for code indent E Shattow (1): riscv: dts: starfive: jh7110-pine64-star64: enable usb0 host function .../boot/dts/starfive/jh7110-pine64-star64.dts | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) -- 2.45.2
