== Description:
This series is the fourth of a multi-part series, that prepares and adds
support for the new lan969x switch driver.
The upstreaming efforts is split into multiple series (might change a
bit as we go along):
1) Prepare the Sparx5 driver for lan969x (merged)
2) Add support for lan969x (same basic features as Sparx5
provides excl. FDMA and VCAP, merged).
3) Add lan969x VCAP functionality (merged).
--> 4) Add RGMII support.
5) Add FDMA support.
== RGMII support:
The lan969x switch device includes two RGMII interfaces (port 28 and 29)
supporting data speeds of 1 Gbps, 100 Mbps and 10 Mbps.
Details are in the commit description of the patches.
== Patch breakdown:
Patch #1 does some preparation work.
Patch #2 adds new function: is_port_rgmii() to the match data ops.
Patch #3 uses the is_port_rgmii() in a number of places.
Patch #4 uses the phy_interface_mode_is_rgmii() in a number of places.
Patch #5 adds checks for RGMII PHY modes in sparx5_verify_speeds().
Patch #6 adds registers required to configure RGMII.
Patch #7 adds RGMII implementation.
Patch #8 document RGMII delays.
To: UNGLinuxDriver@xxxxxxxxxxxxx
To: Andrew Lunn <andrew+netdev@xxxxxxx>
To: David S. Miller <davem@xxxxxxxxxxxxx>
To: Eric Dumazet <edumazet@xxxxxxxxxx>
To: Jakub Kicinski <kuba@xxxxxxxxxx>
To: Paolo Abeni <pabeni@xxxxxxxxxx>
To: Lars Povlsen <lars.povlsen@xxxxxxxxxxxxx>
To: Steen Hegelund <Steen.Hegelund@xxxxxxxxxxxxx>
To: Horatiu Vultur <horatiu.vultur@xxxxxxxxxxxxx>
To: Russell King <linux@xxxxxxxxxxxxxxx>
To: jacob.e.keller@xxxxxxxxx
To: robh@xxxxxxxxxx
To: krzk+dt@xxxxxxxxxx
To: conor+dt@xxxxxxxxxx
Cc: devicetree@xxxxxxxxxxxxxxx
Cc: netdev@xxxxxxxxxxxxxxx
Cc: linux-kernel@xxxxxxxxxxxxxxx
Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
Signed-off-by: Daniel Machon <daniel.machon@xxxxxxxxxxxxx>
---
Changes in v3:
v2 was kindly tested by Robert Marko. Not carrying the tag to v3 since
we have changes to the handling of the delays.
- Modified lan969x_rgmii_delay_config() to not apply any MAC delay when
the {rx,tx}-internal-delay-ps properties are missing or set to 0
(patch #7).
- Removed 'required' constraint from {rx-tx}-internal-delay-ps
properties. Also added description and default value (Patch #8).
- Link to v2: https://lore.kernel.org/r/20241113-sparx5-lan969x-switch-driver-4-v2-0-0db98ac096d1@xxxxxxxxxxxxx
Changes in v2:
Most changes are in patch #7. RGMII implementation has been moved to
it's own file lan969x_rgmii.c.
Details:
- Use ETH_P_8021Q and ETH_P_8021AD instead of the Sparx5 provided
equivalents (patch #7).
- Configure MAC delays through "{rx,tx}-internal-delay-ps"
properties (patch #7).
- Add selectors for all the phase shifts that the hardware supports
(instead of only 2.0 ns, patch #7).
- Add selectors for all the port speeds (instead of only 1000 mbps.)
- Document RGMII delays in dt-bindings.
- Link to v1: https://lore.kernel.org/r/20241106-sparx5-lan969x-switch-driver-4-v1-0-f7f7316436bd@xxxxxxxxxxxxx
---
Daniel Machon (8):
net: sparx5: do some preparation work
net: sparx5: add function for RGMII port check
net: sparx5: use is_port_rgmii() throughout
net: sparx5: use phy_interface_mode_is_rgmii()
net: sparx5: verify RGMII speeds
net: lan969x: add RGMII registers
net: lan969x: add RGMII implementation
dt-bindings: net: sparx5: document RGMII delays
.../bindings/net/microchip,sparx5-switch.yaml | 18 ++
drivers/net/ethernet/microchip/lan969x/Makefile | 2 +-
drivers/net/ethernet/microchip/lan969x/lan969x.c | 5 +
drivers/net/ethernet/microchip/lan969x/lan969x.h | 10 +
.../net/ethernet/microchip/lan969x/lan969x_rgmii.c | 224 +++++++++++++++++++++
.../net/ethernet/microchip/sparx5/sparx5_main.c | 29 ++-
.../net/ethernet/microchip/sparx5/sparx5_main.h | 3 +
.../ethernet/microchip/sparx5/sparx5_main_regs.h | 145 +++++++++++++
.../net/ethernet/microchip/sparx5/sparx5_phylink.c | 3 +
.../net/ethernet/microchip/sparx5/sparx5_port.c | 57 ++++--
.../net/ethernet/microchip/sparx5/sparx5_port.h | 5 +
11 files changed, 473 insertions(+), 28 deletions(-)
---
base-commit: d7ef9eeef0723cc47601923c508ecbebd864f0c0
change-id: 20241104-sparx5-lan969x-switch-driver-4-d59b7820485a
Best regards,
--
Daniel Machon <daniel.machon@xxxxxxxxxxxxx>
