This series adds clocks for ICSSG for AM64x. PATCH 1/2 Adds the dt binding necessary to add clocks to the device tree. It adds the `clocks` in the dt binding of ICSSG node. Each ICSSG instance has 7 clocks available to them as per AM64x TRM [1] Section 6.4.3 Table 6-398. They are not added in the dt bindings yet. This patch adds all available clocks to ICSSG bindings. PATCH 2/2 Adds the required clock to the ICSSG nodes. It also changes the clock used from clock 20 (ICSSG_ICLK) to clock 0 (ICSSG_CORE). This patch adds the clock-names, assigned-clocks and assigned-clock-parents to icssg nodes. More details on clocks can be found at [2] There is no additional driver changes needed for this binding change. Changes from v2 to v3: *) Modified commit message of PATCH 1/2 to state why clocks are being added to the binding. *) Added all available clocks to ICSSG bindings. Earlier only two clocks were added. *) Added all available clocks to AM64x DTS. Earlier only two clocks were added. Changes from v1 to v2: *) Dropped assigned-clocks and assigned-clock-parents from DT binding as suggested by Krzysztof Kozlowski [1] https://www.ti.com/lit/pdf/spruim2 [2] https://software-dl.ti.com/tisci/esd/latest/5_soc_doc/am64x/clocks.html#clocks-for-pru-icssg0-device v1 https://lore.kernel.org/all/20241107104557.1442800-1-danishanwar@xxxxxx/ v2 https://lore.kernel.org/all/20241108142946.2286098-1-danishanwar@xxxxxx/ MD Danish Anwar (2): dt-bindings: soc: ti: pruss: Add clocks for ICSSG arm64: dts: ti: k3-am64-main: Switch ICSSG clock to core clock .../devicetree/bindings/soc/ti/ti,pruss.yaml | 10 +++++++++ arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 22 +++++++++++++++++-- 2 files changed, 30 insertions(+), 2 deletions(-) base-commit: bd05b9a700c10473c2f52bf12c5c5938c30e80b0 -- 2.34.1
