Add initial support for Xiaomi Redmi 5A (riva).
Signed-off-by: Barnabás Czémán <barnabas.czeman@xxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
arch/arm64/boot/dts/qcom/msm8917-xiaomi-riva.dts | 297 +++++++++++++++++++++++
2 files changed, 298 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 9bb8b191aeb517e8f1e3a11bca98a3d0c39c5398..7562406843cfd82397c4844d14a22e8bcf4bba74 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -62,6 +62,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt86518.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt86528.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt88047.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-yiming-uz801v3.dtb
+dtb-$(CONFIG_ARCH_QCOM) += msm8917-xiaomi-riva.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8929-wingtech-wt82918hd.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8939-huawei-kiwi.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8939-longcheer-l9100.dtb
diff --git a/arch/arm64/boot/dts/qcom/msm8917-xiaomi-riva.dts b/arch/arm64/boot/dts/qcom/msm8917-xiaomi-riva.dts
new file mode 100644
index 0000000000000000000000000000000000000000..50bd399991c9bf30152c90088baaf5eee64fef08
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8917-xiaomi-riva.dts
@@ -0,0 +1,297 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2023, Barnabas Czeman
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/arm/qcom,ids.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
+#include "msm8917.dtsi"
+#include "pm8937.dtsi"
+
+/delete-node/ &qseecom_mem;
+
+/ {
+ model = "Xiaomi Redmi 5A (riva)";
+ compatible = "xiaomi,riva", "qcom,msm8917";
+ chassis-type = "handset";
+
+ qcom,msm-id = <QCOM_ID_MSM8917 0>;
+ qcom,board-id = <0x1000b 2>, <0x2000b 2>;
+
+ battery: battery {
+ compatible = "simple-battery";
+ charge-full-design-microamp-hours = <3000000>;
+ energy-full-design-microwatt-hours = <11500000>;
+ constant-charge-current-max-microamp = <1000000>;
+ constant-charge-voltage-max-microvolt = <4400000>;
+ precharge-current-microamp = <256000>;
+ charge-term-current-microamp = <60000>;
+ voltage-min-design-microvolt = <3400000>;
+ };
+
+ chosen {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ stdout-path = "framebuffer0";
+
+ framebuffer0: framebuffer@90001000 {
+ compatible = "simple-framebuffer";
+ reg = <0x0 0x90001000 0x0 (720 * 1280 * 3)>;
+ width = <720>;
+ height = <1280>;
+ stride = <(720 * 3)>;
+ format = "r8g8b8";
+
+ clocks = <&gcc GCC_MDSS_AHB_CLK>,
+ <&gcc GCC_MDSS_AXI_CLK>,
+ <&gcc GCC_MDSS_VSYNC_CLK>,
+ <&gcc GCC_MDSS_MDP_CLK>,
+ <&gcc GCC_MDSS_BYTE0_CLK>,
+ <&gcc GCC_MDSS_PCLK0_CLK>,
+ <&gcc GCC_MDSS_ESC0_CLK>;
+ power-domains = <&gcc MDSS_GDSC>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ key-volup {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ gpios = <&tlmm 91 GPIO_ACTIVE_LOW>;
+ debounce-interval = <15>;
+ };
+ };
+
+ vph_pwr: regulator-vph-pwr {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ reserved-memory {
+ qseecom_mem: qseecom@84a00000 {
+ reg = <0x0 0x84a00000 0x0 0x1900000>;
+ no-map;
+ };
+
+ framebuffer_mem: memory@90001000 {
+ reg = <0x0 0x90001000 0x0 (720 * 1280 * 3)>;
+ no-map;
+ };
+ };
+};
+
+&blsp1_i2c3 {
+ status = "okay";
+
+ touchscreen@38 {
+ compatible = "edt,edt-ft5306";
+ reg = <0x38>;
+ interrupts-extended = <&tlmm 65 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+ vcc-supply = <&pm8937_l10>;
+ iovcc-supply = <&pm8937_l5>;
+
+ touchscreen-size-x = <720>;
+ touchscreen-size-y = <1280>;
+ };
+};
+
+&blsp2_i2c5 {
+ status = "okay";
+
+ bq27426@55 {
+ compatible = "ti,bq27426";
+ reg = <0x55>;
+ monitored-battery = <&battery>;
+ };
+
+ bq25601@6b{
+ compatible = "ti,bq25601";
+ reg = <0x6b>;
+ monitored-battery = <&battery>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <61 IRQ_TYPE_EDGE_FALLING>;
+
+ input-voltage-limit-microvolt = <4400000>;
+ input-current-limit-microamp = <1000000>;
+ };
+};
+
+&pm8937_resin {
+ linux,code = <KEY_VOLUMEDOWN>;
+
+ status = "okay";
+};
+
+&rpm_requests {
+ regulators-0 {
+ compatible = "qcom,rpm-pm8937-regulators";
+
+ vdd_s1-supply = <&vph_pwr>;
+ vdd_s2-supply = <&vph_pwr>;
+ vdd_s3-supply = <&vph_pwr>;
+ vdd_s4-supply = <&vph_pwr>;
+
+ vdd_l1_l19-supply = <&pm8937_s3>;
+ vdd_l2_l23-supply = <&pm8937_s3>;
+ vdd_l3-supply = <&pm8937_s3>;
+ vdd_l4_l5_l6_l7_l16-supply = <&pm8937_s4>;
+ vdd_l8_l11_l12_l17_l22-supply = <&vph_pwr>;
+ vdd_l9_l10_l13_l14_l15_l18-supply = <&vph_pwr>;
+
+ pm8937_s1: s1 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ pm8937_s3: s3 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ };
+
+ pm8937_s4: s4 {
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ };
+
+ pm8937_l2: l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8937_l5: l5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8937_l6: l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8937_l7: l7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8937_l8: l8 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2900000>;
+ };
+
+ pm8937_l9: l9 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ pm8937_l10: l10 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ pm8937_l11: l11 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8937_l12: l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8937_l13: l13 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3075000>;
+ };
+
+ pm8937_l14: l14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ pm8937_l15: l15 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ pm8937_l16: l16 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8937_l17: l17 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2900000>;
+ };
+
+ pm8937_l19: l19 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1350000>;
+ };
+
+ pm8937_l22: l22 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ pm8937_l23: l23 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+ };
+
+};
+
+&sdhc_1 {
+ vmmc-supply = <&pm8937_l8>;
+ vqmmc-supply = <&pm8937_l5>;
+
+ status = "okay";
+};
+
+&sdhc_2 {
+ cd-gpios = <&tlmm 67 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <&pm8937_l11>;
+ vqmmc-supply = <&pm8937_l12>;
+
+ status = "okay";
+};
+
+&sleep_clk {
+ clock-frequency = <32768>;
+};
+
+&wcnss {
+ vddpx-supply = <&pm8937_l5>;
+
+ status = "okay";
+};
+
+&wcnss_iris {
+ compatible = "qcom,wcn3620";
+ vddxo-supply = <&pm8937_l7>;
+ vddrfa-supply = <&pm8937_l19>;
+ vddpa-supply = <&pm8937_l9>;
+ vdddig-supply = <&pm8937_l5>;
+};
+
+&wcnss_mem {
+ status = "okay";
+};
+
+&xo_board {
+ clock-frequency = <19200000>;
+};
--
2.47.0
