Add support to scale DDR and L3 frequencies based on CPU frequencies on Qualcomm SA8775P platform. Also add LMH interrupts in cpufreq_hw node to indicate if there is any thermal throttle. The changes in this series are dependent on below series changes: https://lore.kernel.org/all/20241112075826.28296-1-quic_rlaggysh@xxxxxxxxxxx/ Signed-off-by: Jagadeesh Kona <quic_jkona@xxxxxxxxxxx> --- Changes in v2: - Squashed 1st and 2nd patches into a single patch as per review comments. - Alinged the & properly for ICC phandles in CPU DT nodes. - Updated the commit text for LMH interrupts patch. - Link to v1: https://lore.kernel.org/r/20241017-sa8775p-cpufreq-l3-ddr-scaling-v1-0-074e0fb80b33@xxxxxxxxxxx --- Jagadeesh Kona (2): arm64: dts: qcom: sa8775p: Add CPU OPP tables to scale DDR/L3 arm64: dts: qcom: sa8775p: Add LMH interrupts for cpufreq_hw node arch/arm64/boot/dts/qcom/sa8775p.dtsi | 215 ++++++++++++++++++++++++++++++++++ 1 file changed, 215 insertions(+) --- base-commit: c38b541e924a8c5494db67b0ebf04cbcd84ca767 change-id: 20241112-sa8775p-cpufreq-l3-ddr-scaling-e10b3d71a80b Best regards, -- Jagadeesh Kona <quic_jkona@xxxxxxxxxxx>
