Re: [PATCH v3 1/2] arm64: dts: qcom: Add support for usb nodes on QCS8300

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 11/5/24 17:49, Krishna Kurapati wrote:
Add support for USB controllers on QCS8300. The second
controller is only High Speed capable.

Signed-off-by: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
---

[...]

(the PHYs look good)

+		usb_1: usb@a6f8800 {
+			compatible = "qcom,qcs8300-dwc3", "qcom,dwc3";
+			reg = <0x0 0x0a6f8800 0x0 0x400>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;

Please match the property style with x1e80100.dtsi's dwc3 node

[...]

+
+			usb_2_dwc3: usb@a400000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x0a400000 0x0 0xe000>;
+				interrupts = <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>;
+				iommus = <&apps_smmu 0x20 0x0>;
+				phys = <&usb_2_hsphy>;
+				phy-names = "usb2-phy";
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
+				snps,dis_enblslpm_quirk;

maximum-speed = "high-speed"

Konrad




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux