Hi all, This patch implements I2C driver for the SpacemiT K1 SoC, providing basic support for I2C read/write communication which compatible with standard I2C bus specifications. In this version, the driver defaults to use fast-speed-mode and interrupts for transmission, and does not support DMA, high-speed mode, or FIFO. The docs of I2C can be found here, in chapter 16.1 I2C [1] Link: https://developer.spacemit.com/documentation?token=Rn9Kw3iFHirAMgkIpTAcV2Arnkf#part5 [1] --- Change in v3: - Patch #1: - Change the maxItems of reg from 2 to 1 in properties - Modify reg in dts example - Changed the enum selection for clock-frequency to a range, setting a minimum value of 1 and a maximum value of 3,300,000. - Patch #2: - Drop unused judgement in `spacemit_i2c_xfer_msg` - Fix the dangling else warning in `spacemit_i2c_is_last_msg` - Fix the error check for `i2c->base` - Modify Kconfig dependencies Link to v2: https://lore.kernel.org/all/20241028053220.346283-1-TroyMitchell988@xxxxxxxxx/ Change in v2: - Patch #1: - Change the maxItems of reg from 1 to 2 in properties - Change 'i2c' to 'I2C' in the commit message. - Drop fifo-disable property - Drop alias in dts example - Move `unevaluatedProperties` after `required:` block - Patch #2: - Alphabetize Makefile and Kconfig - Change `.remove_new` to `.remove` in `struct platform_driver` - Change `dev_alert` to `dev_warn_ratelimited` in `spacemit_i2c_bus_reset` - Change `spacemit_i2c_read/write_reg` to `read/writel` - Change `spacemit_i2c_dt_match` to `spacemit_i2c_of_match` - Clean up code flow - Fix unnecessary line wraps - Move `spacemit_i2c_handle_err` to a suitable location - Modify Kconfig dependencies - Use `PTR_ERR(i2c->base)` directly as the `dev_err_probe` parameter instead of the intermediate variable Link to v1: https://lore.kernel.org/all/20241015075134.1449458-1-TroyMitchell988@xxxxxxxxx/ --- Troy Mitchell (2): dt-bindings: i2c: spacemit: add support for K1 SoC i2c: spacemit: add support for SpacemiT K1 SoC .../bindings/i2c/spacemit,k1-i2c.yaml | 51 ++ drivers/i2c/busses/Kconfig | 18 + drivers/i2c/busses/Makefile | 1 + drivers/i2c/busses/i2c-k1.c | 658 ++++++++++++++++++ 4 files changed, 728 insertions(+) create mode 100644 Documentation/devicetree/bindings/i2c/spacemit,k1-i2c.yaml create mode 100644 drivers/i2c/busses/i2c-k1.c -- 2.34.1 --- Troy Mitchell (2): dt-bindings: i2c: spacemit: add support for K1 SoC i2c: spacemit: add support for SpacemiT K1 SoC .../devicetree/bindings/i2c/spacemit,k1-i2c.yaml | 52 ++ drivers/i2c/busses/Kconfig | 19 + drivers/i2c/busses/Makefile | 1 + drivers/i2c/busses/i2c-k1.c | 656 +++++++++++++++++++++ 4 files changed, 728 insertions(+) --- base-commit: 8e929cb546ee42c9a61d24fae60605e9e3192354 change-id: 20241031-k1-i2c-master-fe7f7b0dce93 prerequisite-change-id: 20240626-k1-01-basic-dt-1aa31eeebcd2:v5 prerequisite-patch-id: 47dcf6861f7d434d25855b379e6d7ef4ce369c9c prerequisite-patch-id: 77787fe82911923aff15ccf565e8fa451538c3a6 prerequisite-patch-id: b0bdb1742d96c5738f05262c3b0059102761390b prerequisite-patch-id: 3927d39d8d77e35d5bfe53d9950da574ff8f2054 prerequisite-patch-id: a98039136a4796252a6029e474f03906f2541643 prerequisite-patch-id: c95f6dc0547a2a63a76e3cba0cf5c623b212b4e6 prerequisite-patch-id: 66e750e438ee959ddc2a6f0650814a2d8c989139 prerequisite-patch-id: 29a0fd8c36c1a4340f0d0b68a4c34d2b8abfb1ab prerequisite-patch-id: 0bdfff661c33c380d1cf00a6c68688e05f88c0b3 prerequisite-patch-id: 99f15718e0bfbb7ed1a96dfa19f35841b004dae9 Best regards, -- Troy Mitchell <TroyMitchell988@xxxxxxxxx>
