Hi, On Mon, Nov 11, 2024 at 11:27:01AM +0100, Andreas Kemnade wrote: > Apparently there was some confusion regarding milliohm vs. megaohm. > (m/M). Use microohms to be able to properly specify the charger > resistor like other drivers do. This is not used yet by mainline code > yet. Specify a current sense resistor in milliohms range rather then > megaohms range in the examples. > > CC: sre@xxxxxxxxxx > Reported-by: Matti Vaittinen <mazziesaccount@xxxxxxxxx> > Closes: https://lore.kernel.org/imx/6dcd724a-a55c-4cba-a45b-21e76b1973b0@xxxxxxxxx/T/#mf590875a9f4d3955cd1041d7196ff0c65c0a7e9d > Signed-off-by: Andreas Kemnade <andreas@xxxxxxxxxxxx> > Reviewed-by: Matti Vaittinen <mazziesaccount@xxxxxxxxx> > --- Reviewed-by: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx> -- Sebastian > Changes in V2: > - typo fix > > .../devicetree/bindings/mfd/rohm,bd71828-pmic.yaml | 13 +++++++------ > 1 file changed, 7 insertions(+), 6 deletions(-) > > diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml > index fa17686a64f7..09e7d68e92bf 100644 > --- a/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml > +++ b/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml > @@ -55,14 +55,15 @@ properties: > minimum: 0 > maximum: 1 > > - rohm,charger-sense-resistor-ohms: > - minimum: 10000000 > - maximum: 50000000 > + rohm,charger-sense-resistor-micro-ohms: > + minimum: 10000 > + maximum: 50000 > + default: 30000 > description: | > BD71827 and BD71828 have SAR ADC for measuring charging currents. > External sense resistor (RSENSE in data sheet) should be used. If some > - other but 30MOhm resistor is used the resistance value should be given > - here in Ohms. > + other but 30mOhm resistor is used the resistance value should be given > + here in microohms. > > regulators: > $ref: /schemas/regulator/rohm,bd71828-regulator.yaml > @@ -114,7 +115,7 @@ examples: > #gpio-cells = <2>; > gpio-reserved-ranges = <0 1>, <2 1>; > > - rohm,charger-sense-resistor-ohms = <10000000>; > + rohm,charger-sense-resistor-micro-ohms = <10000>; > > regulators { > buck1: BUCK1 { > -- > 2.39.5 >
Attachment:
signature.asc
Description: PGP signature
