Add compatible string 'nxp,p3t1085' since p3t1085's register layout is the same as tmp108. The p3t1085 supports I3C interface. Update document tmp108.rst and Kconfig's help context. Signed-off-by: Frank Li <Frank.Li@xxxxxxx> --- change from v2 to v3 - new patch - update documment --- Documentation/hwmon/tmp108.rst | 8 ++++++++ drivers/hwmon/Kconfig | 2 +- drivers/hwmon/tmp108.c | 1 + 3 files changed, 10 insertions(+), 1 deletion(-) diff --git a/Documentation/hwmon/tmp108.rst b/Documentation/hwmon/tmp108.rst index 6df7cf1b42f49..bc4941d982681 100644 --- a/Documentation/hwmon/tmp108.rst +++ b/Documentation/hwmon/tmp108.rst @@ -3,6 +3,14 @@ Kernel driver tmp108 Supported chips: + * NXP P3T1085 + + Prefix: 'p3t1085' + + Addresses scanned: none + + Datasheet: https://www.nxp.com/docs/en/data-sheet/P3T1085UK.pdf + * Texas Instruments TMP108 Prefix: 'tmp108' diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index cfb4e9314c62a..d43ca7aa4a548 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -2300,7 +2300,7 @@ config SENSORS_TMP108 select REGMAP_I2C help If you say yes here you get support for Texas Instruments TMP108 - sensor chips. + sensor chips and NXP P3T1085. This driver can also be built as a module. If so, the module will be called tmp108. diff --git a/drivers/hwmon/tmp108.c b/drivers/hwmon/tmp108.c index a82bbc959eb15..b561b452d8d39 100644 --- a/drivers/hwmon/tmp108.c +++ b/drivers/hwmon/tmp108.c @@ -420,6 +420,7 @@ MODULE_DEVICE_TABLE(i2c, tmp108_i2c_ids); #ifdef CONFIG_OF static const struct of_device_id tmp108_of_ids[] = { + { .compatible = "nxp,p3t1085", }, { .compatible = "ti,tmp108", }, {} }; -- 2.34.1
