Re: [PATCH v1 1/3] arm64: dts: marvell: Fix anyOf conditional failed

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Nov 11, 2024 at 10:25:12AM -0600, Rob Herring wrote:
> On Sun, Nov 10, 2024 at 3:25 AM Frank Wunderlich
> <frank-w@xxxxxxxxxxxxxxx> wrote:
> >
> > Am 9. November 2024 18:29:44 MEZ schrieb Andrew Lunn <andrew@xxxxxxx>:
> > >On Sat, Nov 09, 2024 at 10:46:19AM +0100, Frank Wunderlich wrote:
> > >> From: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx>
> > >>
> > >> after converting the ahci-platform binding to yaml the following files
> > >> reporting "'anyOf' conditional failed" on
> > >>
> > >> sata@540000: sata-port@0
> > >> diff --git a/arch/arm64/boot/dts/marvell/armada-7040-db.dts b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
> > >> index 1e0ab35cc686..2b5e45d2c5a6 100644
> > >> --- a/arch/arm64/boot/dts/marvell/armada-7040-db.dts
> > >> +++ b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
> > >> @@ -214,6 +214,7 @@ &cp0_sata0 {
> > >>
> > >>      sata-port@1 {
> > >>              phys = <&cp0_comphy3 1>;
> > >> +            status = "okay";
> > >>      };
> > >>  };
> > >
> > >>
> > >> diff --git a/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts b/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts
> > >> index 7af949092b91..6bdc4f1e6939 100644
> > >> --- a/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts
> > >> +++ b/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts
> > >> @@ -433,11 +433,13 @@ &cp0_sata0 {
> > >>      /* 7 + 12 SATA connector (J24) */
> > >>      sata-port@0 {
> > >>              phys = <&cp0_comphy2 0>;
> > >> +            status = "okay";
> > >>      };
> > >>
> > >>      /* M.2-2250 B-key (J39) */
> > >>      sata-port@1 {
> > >>              phys = <&cp0_comphy3 1>;
> > >> +            status = "okay";
> > >>      };
> > >>  };
> > >> diff --git a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
> > >> index 7e595ac80043..161beec0b6b0 100644
> > >> --- a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
> > >> +++ b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
> > >> @@ -347,10 +347,12 @@ CP11X_LABEL(sata0): sata@540000 {
> > >>
> > >>                      sata-port@0 {
> > >>                              reg = <0>;
> > >> +                            status = "disabled";
> > >>                      };
> > >
> > >I don't know the yaml too well, but it is not obvious how adding a few
> > >status = "disabled"; status = "okay"; fixes a "'anyOf' conditional failed".
> > >
> > >Maybe you can expand the explanation a bit?
> > >
> > >       Andrew
> >
> > Hi angelo,
> >
> > I guess the dtbs_check only checks required properties from yaml if the node is enabled.
> 
> Yes, that is exactly how it works.

So from this, can i imply that phys is a required property?

Looking at the above patch, it appears that for armada-*.dts,
sata-port@0 always uses phys = <&cp0_comphy2 0> and sata-port@1 uses
phys = <&cp0_comphy3 1>. Is this an actual SoC property? Could it be
moved up into the .dtsi file? Or is it really a board property?

	Andrew




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux