> Subject: Re: [PATCH v3 1/8] dt-bindings: clock: imx8m-clock: support > spread spectrum clocking > > On 09/11/2024 11:05, Krzysztof Kozlowski wrote: > > On 09/11/2024 01:37, Peng Fan wrote: > >>> Subject: Re: [PATCH v3 1/8] dt-bindings: clock: imx8m-clock: > support > >>> spread spectrum clocking > >>> > >>> On 08/11/2024 13:50, Peng Fan wrote: > >>>>> Subject: Re: [PATCH v3 1/8] dt-bindings: clock: imx8m-clock: > >>> support > >>>>> spread spectrum clocking > >>>>> > >>>>> On 07/11/2024 15:57, Dario Binacchi wrote: > >>>>>> clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, > <&clk_ext2>, > >>>>>> <&clk_ext3>, <&clk_ext4>; > >>>>>> clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2", > >>>>>> "clk_ext3", "clk_ext4"; > >>>>>> assigned-clocks = <&clk IMX8MN_CLK_A53_SRC>, > >>>>>> <&clk IMX8MN_CLK_A53_CORE>, > >>>>>> <&clk IMX8MN_CLK_NOC>, > >>>>>> <&clk IMX8MN_CLK_AUDIO_AHB>, > >>>>>> <&clk IMX8MN_CLK_IPG_AUDIO_ROOT>, > >>>>>> <&clk IMX8MN_SYS_PLL3>, > >>>>>> <&clk IMX8MN_AUDIO_PLL1>, > >>>>>> <&clk IMX8MN_AUDIO_PLL2>; > >>>>>> assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_800M>, > >>>>>> <&clk IMX8MN_ARM_PLL_OUT>, > >>>>>> <&clk IMX8MN_SYS_PLL3_OUT>, > >>>>>> <&clk IMX8MN_SYS_PLL1_800M>; > >>>>>> assigned-clock-rates = <0>, <0>, <0>, > >>>>>> <400000000>, > >>>>>> <400000000>, > >>>>>> <600000000>, > >>>>>> <393216000>, > >>>>>> <361267200>; }; > >>>>>> > >>>>>> The spread spectrum is not configurable on these clocks or, > more > >>>>>> generally, may not be configurable (only 4 PLLs have this > >>> capability). > >>>>>> Therefore, I need the "fsl,ssc-clocks" > >>>>> > >>>>> No. That's not true. You do not need it. > >>>>> > >>>> > >>>> i.MX8M clock hardware is similar as: > >>>> > >>>> OSC->ANATOP->CCM > >>>> > >>>> ANATOP will produce PLLs. > >>>> CCM use PLLs as input source. > >>>> > >>>> Currently there is no dedicated ANATOP driver in linux. > >>>> The CCM linux driver will parse the ANATOP node and register > clk_hw > >>>> for the PLLs. > >>> > >>> I do not know what is CCM and how does it fit here. What's more, I > >>> don't get driver context here. We talk about bindings. > >> > >> > >> CCM: Clock Control Module, it accepts PLL from anatop as inputs, > and > >> outputs clocks to various modules, I2C, CAN, NET, SAI and ... > >> > >>> > >>> > >>>> > >>>> > >>>>> First, the clock inputs for this device are listed in clocks *only*. > >>>>> What is no there, is not an input to the device. Including also > >>>>> Linux aspect (missing devlinks etc). Therefore how can you > >>>>> configure > >>> spread > >>>>> spectrum on clocks which are not connected to this device? > >>>> > >>>> I not understand this well, you mean add clocks = <xx > >>>> CLK_IMX8MM_VIDEO_PLL> in the ccm dtb node? > >>> > >>> Yes. Let me re-iterate and please respond to this exactly comment > >>> instead of ignoring it. > >>> > >>> How a device can care about spread spectrum of a clock which is > not > >>> supplied to this device? > >> > >> I hope we are on same page of what spread spectrum means. > >> spread spectrum of a clock is the clock could produce freq in a > >> range, saying [500MHz - 100KHz, 500MHz + 100KHz]. software only > need > >> to configure the middle frequency and choose the up/down border > >> range(100KHz here) and enable spread spectrum. > >> > >> device: I suppose you mean the Clock Control Module(CCM) here. > > > > I mean the device we discuss here, in this binding. Whatever this > > device is. CCM or CCX > > > >> CCM does not care, it just accepts the PLL as input, and output > > > > Takes PLL as input but you refuse to add it as clocks? Are you really > > responding to my question? > > > > I asked how can you set spread spectrum on clock which you do not > > receive. Why you do not receive? Because you refuse to add it to > > clocks even though I speak about this since months. > > > >> divided clock to various IPs(Video here). The video IPs care about > >> the spread spectrum of the clock. > > > > So which device do we talk about? I am not a NXP clock developer > and I > > care zero about NXP, so keep it simple. We discuss this one specific > > binding for specific device which is called "imx8m-clock" - see > > subject prefix. > > > >> > >> The clock hardware path is as below: > >> > >> OSC(24M) --> Anatop(produce PLL with spread spectrum) -> Clock > >> Control Module(output clock to modules) -> Video IP > >> > >> From hardware perspective, Clock Control Module does not care > spread > >> spectrum. Video IP cares spread spectrum. > >> > >> > >>> > >>> Why would you care about spread spectrum of some clock which is > not > >>> coming to this device? > >> > >> device, I suppose you mean clock control module(CCM). > >> > >> There is no 'clocks = <&ccm CLK_IMX8M_VIDEO_PLL>' under ccm > node. > >> Because in current design, ccm is taken as producer of > >> CLK_IMX8M_VIDEO_PLL, not consumer. > > > > I don't understand now even more. Or I understand even less now. > Why > > binding references its own clocks via phandle? This makes no sense > at > > all, except of course assigned clocks, but that's because we have one > > property for multiple cases. > > And BTW if that was the point then the example is confusing because > the &clk phandle is not the device node in the example but it should. > Neither description says which device's clocks are these. > > This is expressed very poorly in the binding, look: > "Phandles of the PLL" - it clearly suggests some other clocks, not its > own, that's so obvious I did not even think of asking. Patchset goes > slow also because of poor explanation, lack of diagrams and expecting > me to remember your clock hierarchy. Dario may improve the patchset in new version. But let me just try to explain a bit more about the hardware logic, I hope this could give you some knowledge on i.MX clock and we could get some suggestions on next: OSC will generate 24MHz clock to Anatop module. Anatop module takes 24MHz as input and produces various PLLs. Clock Control Module(CCM) takes PLLs as input, and outputs the final clocks to various IPs, saying video IPs. The Anatop module could produce PLLs with spread spectrum enabled. The Clock Control module just divides the freq and output the end IPs. The end IPs cares about spread spectrum for high quality clock, the Clock Control modules does not care. Now back to binding, There is a imx8m-anatop binding fsl,imx8m-anatop.yaml for anatop and a imx8m-clock.yaml binding for clock control module. I think the patchset is to enable spread spectrum of a PLL globally, not for a specific device saying video IP here. So the patchset put the properties under the clock control module. For example, there are VPU_JPEG, VPU_DECODE, both will use video PLL with high quality. So the clock producer just produce PLLs with Spread Spectrum(SS) enabled, and put the SS properties under CCM or anatop node, not video IP nodes. We could have a talk on IRC if Dario, Abel and you are available to discuss on this topic. Thanks, Peng. > > Best regards, > Krzysztof
