On Thu, 07 Nov 2024 18:02:26 -0500 Frank Li <Frank.Li@xxxxxxx> wrote: > Add basic function support for P3T1085 temperature sensor. > - Add binding doc trivial.yaml > - Add basic read temperature driver Hi Frank, For a simple temperature sensor the usual question is why IIO rather than hwmon? Previous reasons have been: - Very high performmance / accuracy part (i.e. expensive) - Remote temperature so not typically hw monitoring. - Same silicon with a more complex sensor (typically humidity or similar). Any of those apply? Or some other reason? +CC hwmon maintainers and list. Jonathan > - Update imx93-9x9-qsb.dts > > Signed-off-by: Frank Li <Frank.Li@xxxxxxx> > --- > Carlos Song (1): > iio: temperature: Add support for P3T1085 > > Frank Li (2): > dt-bindings: trivial-devices: Add NXP P3T1085UK I3C/I2C temperature sensor > arm64: dts: imx93-9x9-qsb: add temp-sensor nxp,p3t1085 > > .../devicetree/bindings/trivial-devices.yaml | 2 + > arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts | 5 ++ > drivers/iio/temperature/Kconfig | 1 + > drivers/iio/temperature/Makefile | 2 + > drivers/iio/temperature/p3t/Kconfig | 29 ++++++++ > drivers/iio/temperature/p3t/Makefile | 5 ++ > drivers/iio/temperature/p3t/p3t1085.h | 31 +++++++++ > drivers/iio/temperature/p3t/p3t1085_core.c | 79 ++++++++++++++++++++++ > drivers/iio/temperature/p3t/p3t1085_i2c.c | 68 +++++++++++++++++++ > drivers/iio/temperature/p3t/p3t1085_i3c.c | 59 ++++++++++++++++ > 10 files changed, 281 insertions(+) > --- > base-commit: 74741a050b79d31d8d2eeee12c77736596d0a6b2 > change-id: 20241107-p3t1085-fbd8726cbc0e > > Best regards, > --- > Frank Li <Frank.Li@xxxxxxx> > >
