Add the necessary DT changes to enable HDMI on Hardkernel ODROID-M2. Signed-off-by: Jonas Karlman <jonas@xxxxxxxxx> --- Tested and working with video=1920x1080@60 cmdline on a ODROID-M2. --- .../boot/dts/rockchip/rk3588s-odroid-m2.dts | 47 +++++++++++++++++++ 1 file changed, 47 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-odroid-m2.dts b/arch/arm64/boot/dts/rockchip/rk3588s-odroid-m2.dts index 63d91236ba9f..8f034c6d494c 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-odroid-m2.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588s-odroid-m2.dts @@ -5,6 +5,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/leds/common.h> #include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/soc/rockchip,vop2.h> #include <dt-bindings/usb/pd.h> #include "rk3588s.dtsi" @@ -22,6 +23,17 @@ chosen { stdout-path = "serial2:1500000n8"; }; + hdmi-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi0_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -236,6 +248,26 @@ &gpu { status = "okay"; }; +&hdmi0 { + status = "okay"; +}; + +&hdmi0_in { + hdmi0_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi0>; + }; +}; + +&hdmi0_out { + hdmi0_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&hdptxphy_hdmi0 { + status = "okay"; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0m2_xfer>; @@ -901,3 +933,18 @@ usbdp_phy0_dp_altmode_mux: endpoint@1 { }; }; }; + +&vop { + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = <ROCKCHIP_VOP2_EP_HDMI0>; + remote-endpoint = <&hdmi0_in_vp0>; + }; +}; -- 2.46.2