[PATCH v2 1/2] ARM: dts: aspeed: catalina: update pdb board cpld ioexp linename

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Due to there are huge changes of PDB CPLD IOEXP pin definitions since
DVT version, Update the CPLD IOEXP nodes and GPIO linename of each PDB
CPLD IO expander based on latest DVT CPLD firmware.

Signed-off-by: Potin Lai <potin.lai.pt@xxxxxxxxx>
---
 .../dts/aspeed/aspeed-bmc-facebook-catalina.dts    | 99 +++++++---------------
 1 file changed, 29 insertions(+), 70 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
index 82835e96317d..10a9fca1b803 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
@@ -802,26 +802,6 @@ io_expander12: gpio@13 {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
-
-	// PDB CPLD IOEXP 0x14
-	io_expander13: gpio@14 {
-		compatible = "nxp,pca9555";
-		interrupt-parent = <&gpio0>;
-		interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
-		reg = <0x14>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	// PDB CPLD IOEXP 0x15
-	io_expander14: gpio@15 {
-		compatible = "nxp,pca9555";
-		interrupt-parent = <&gpio0>;
-		interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
-		reg = <0x15>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
 };
 
 &i2c15 {
@@ -1040,71 +1020,50 @@ &io_expander8 {
 
 &io_expander9 {
 	gpio-line-names =
-		"LEAK3_DETECT_R","LEAK1_DETECT_R",
-		"LEAK2_DETECT_R","LEAK0_DETECT_R",
-		"CHASSIS3_LEAK_Q_N_PLD","CHASSIS1_LEAK_Q_N_PLD",
-		"CHASSIS2_LEAK_Q_N_PLD","CHASSIS0_LEAK_Q_N_PLD",
-		"P12V_AUX_FAN_ALERT_PLD_N","P12V_AUX_FAN_OC_PLD_N",
-		"P12V_AUX_FAN_FAULT_PLD_N","LEAK_DETECT_RMC_N_R",
-		"RSVD_RMC_GPIO3_R","SMB_RJ45_FIO_TMP_ALERT",
-		"","";
+		"wSequence_Latch_State_N","wP12V_N1N2_RUNTIME_FLT_N",
+		"wP12V_FAN_RUNTIME_FLT_N","wP12V_AUX_RUNTIME_FLT_N",
+		"wHost_PERST_SEQPWR_FLT_N","wP12V_N1N2_SEQPWR_FLT_N",
+		"wP12V_FAN_SEQPWR_FLT_N","wP12V_AUX_SEQPWR_FLT_N",
+		"wP12V_RUNTIME_FLT_NIC1_N","wAUX_RUNTIME_FLT_NIC1_N",
+		"wP12V_SEQPWR_FLT_NIC1_N","wAUX_SEQPWR_FLT_NIC1_N",
+		"wP12V_RUNTIME_FLT_NIC0_N","wAUX_RUNTIME_FLT_NIC0_N",
+		"wP12V_SEQPWR_FLT_NIC0_N","wAUX_SEQPWR_FLT_NIC0_N";
 };
 
 &io_expander10 {
 	gpio-line-names =
 		"FM_P12V_NIC1_FLTB_R_N","FM_P3V3_NIC1_FAULT_R_N",
-		"OCP_V3_2_PWRBRK_FROM_HOST_ISO_PLD_N",
-		"P12V_AUX_NIC1_SENSE_ALERT_R_N",
 		"FM_P12V_NIC0_FLTB_R_N","FM_P3V3_NIC0_FAULT_R_N",
-		"OCP_SFF_PWRBRK_FROM_HOST_ISO_PLD_N",
-		"P12V_AUX_NIC0_SENSE_ALERT_R_N",
+		"P48V_HS2_FAULT_N_PLD","P48V_HS1_FAULT_N_PLD",
+		"P12V_AUX_FAN_OC_PLD_N","P12V_AUX_FAN_FAULT_PLD_N",
+		"","",
+		"","",
+		"","FM_SYS_THROTTLE_N",
+		"OCP_V3_2_PWRBRK_FROM_HOST_ISO_PLD_N",
+		"OCP_SFF_PWRBRK_FROM_HOST_ISO_PLD_N";
+};
+
+&io_expander11 {
+	gpio-line-names =
 		"P12V_AUX_PSU_SMB_ALERT_R_L","P12V_SCM_SENSE_ALERT_R_N",
+		"P12V_AUX_NIC1_SENSE_ALERT_R_N","P12V_AUX_NIC0_SENSE_ALERT_R_N",
 		"NODEB_PSU_SMB_ALERT_R_L","NODEA_PSU_SMB_ALERT_R_L",
-		"P52V_SENSE_ALERT_PLD_N","P48V_HS2_FAULT_N_PLD",
-		"P48V_HS1_FAULT_N_PLD","";
+		"P12V_AUX_FAN_ALERT_PLD_N","P52V_SENSE_ALERT_PLD_N",
+		"PRSNT_RJ45_FIO_N_R","FM_MAIN_PWREN_RMC_EN_ISO_R",
+		"CHASSIS3_LEAK_Q_N_PLD","CHASSIS2_LEAK_Q_N_PLD",
+		"CHASSIS1_LEAK_Q_N_PLD","CHASSIS0_LEAK_Q_N_PLD",
+		"","SMB_RJ45_FIO_TMP_ALERT";
 };
 
-&io_expander11 {
+&io_expander12 {
 	gpio-line-names =
 		"FAN_7_PRESENT_N","FAN_6_PRESENT_N",
 		"FAN_5_PRESENT_N","FAN_4_PRESENT_N",
 		"FAN_3_PRESENT_N","FAN_2_PRESENT_N",
 		"FAN_1_PRESENT_N","FAN_0_PRESENT_N",
-		"PRSNT_CHASSIS3_LEAK_CABLE_R_N","PRSNT_CHASSIS1_LEAK_CABLE_R_N",
-		"PRSNT_CHASSIS2_LEAK_CABLE_R_N","PRSNT_CHASSIS0_LEAK_CABLE_R_N",
-		"PRSNT_RJ45_FIO_N_R","PRSNT_HDDBD_POWER_CABLE_N",
-		"PRSNT_OSFP_POWER_CABLE_N","";
-};
-
-&io_expander12 {
-	gpio-line-names =
-		"RST_OCP_V3_1_R_N","NIC0_PERST_N",
-		"OCP_SFF_PERST_FROM_HOST_ISO_PLD_N","OCP_SFF_MAIN_PWR_EN",
-		"FM_OCP_SFF_PWR_GOOD_PLD","OCP_SFF_AUX_PWR_PLD_EN_R",
-		"HP_LVC3_OCP_V3_1_PWRGD_PLD","HP_OCP_V3_1_HSC_PWRGD_PLD_R",
-		"RST_OCP_V3_2_R_N","NIC1_PERST_N",
-		"OCP_V3_2_PERST_FROM_HOST_ISO_PLD_N","OCP_V3_2_MAIN_PWR_EN",
-		"FM_OCP_V3_2_PWR_GOOD_PLD","OCP_V3_2_AUX_PWR_PLD_EN_R",
-		"HP_LVC3_OCP_V3_2_PWRGD_PLD","HP_OCP_V3_2_HSC_PWRGD_PLD_R";
-};
-
-&io_expander13 {
-	gpio-line-names =
-		"NODEA_NODEB_PWOK_PLD_ISO_R","PWR_EN_NICS",
-		"PWRGD_P12V_AUX_FAN_PLD","P12V_AUX_FAN_EN_PLD",
-		"PWRGD_P3V3_AUX_PLD","PWRGD_P12V_AUX_PLD_ISO_R",
-		"FM_MAIN_PWREN_FROM_RMC_R","FM_MAIN_PWREN_RMC_EN_ISO_R",
-		"PWRGD_RMC_R","PWRGD_P12V_AUX_FAN_PLD",
-		"P12V_AUX_FAN_EN_PLD","FM_SYS_THROTTLE_N",
 		"HP_LVC3_OCP_V3_2_PRSNT2_PLD_N","HP_LVC3_OCP_V3_1_PRSNT2_PLD_N",
-		"","";
+		"PRSNT_HDDBD_POWER_CABLE_N","PRSNT_OSFP0_POWER_CABLE_N",
+		"PRSNT_CHASSIS3_LEAK_CABLE_R_N","PRSNT_CHASSIS2_LEAK_CABLE_R_N",
+		"PRSNT_CHASSIS1_LEAK_CABLE_R_N","PRSNT_CHASSIS0_LEAK_CABLE_R_N";
 };
 
-&io_expander14 {
-	gpio-line-names =
-		"","","","","","","","",
-		"FM_BOARD_BMC_SKU_ID3","FM_BOARD_BMC_SKU_ID2",
-		"FM_BOARD_BMC_SKU_ID1","FM_BOARD_BMC_SKU_ID0",
-		"FAB_BMC_REV_ID2","FAB_BMC_REV_ID1",
-		"FAB_BMC_REV_ID0","";
-};

-- 
2.31.1





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux