On Wed, Nov 6, 2024 at 3:17 PM Frank Wunderlich (linux) <linux@xxxxxxxxx> wrote:
>
> Am 2024-11-06 19:39, schrieb Rob Herring:
> > On Wed, Nov 6, 2024 at 12:34 PM Frank Wunderlich <linux@xxxxxxxxx>
> > wrote:
> >>
> >> Am 5. November 2024 17:28:57 MEZ schrieb Gregory CLEMENT
> >> <gregory.clement@xxxxxxxxxxx>:
> >> >"Rob Herring (Arm)" <robh@xxxxxxxxxx> writes:
> >> >
> >> >> While "phy-names" is allowed for sata-port nodes, the names used aren't
> >> >> documented and are incorrect ("sata-phy" is what's documented). The name
> >> >> for a single entry is fairly useless, so just drop the property.
> >> >>
> >> >> Signed-off-by: Rob Herring (Arm) <robh@xxxxxxxxxx>
> >> >
> >> >Applied on mvebu/dt64
> >> >
> >> >Thanks,
> >> >
> >> >Gregory
> >> >> ---
> >> >> Cc: Frank Wunderlich <linux@xxxxxxxxx>
> >> >>
> >> >> There's also this 2 year old patch fixing other SATA errors[1] which
> >> >> was never picked up. :(
> >> >>
> >> >> [1] https://lore.kernel.org/linux-arm-kernel/20220311210357.222830-3-linux@xxxxxxxxx/
> >>
> >> Hi
> >>
> >> How to deal with my patch pointed by rob?
> >
> > I believe it will conflict with mine. Can you rebase on top of
> > mvebu/dt64 and resend it.
> >
> > Rob
>
> i have rebased my patch [1], but it seems there are much more errors
> there (which i tried to fix there too).
>
> To be honest marvell is confusing to me finding the right file to patch
> because of many dtsi files included by each other mixed with some
> macros.
>
> at least some properties have to be documented in yaml:
>
> arch/arm64/boot/dts/marvell/armada-8040-db.dtb: sata@540000: Unevaluated
> properties are not allowed ('#address-cells', '#size-cells',
> 'dma-coherent', 'iommus' were unexpected)
iommus should be added to ahci-platform.yaml.
I think the others are just a side effect because sata-common.yaml
fails due to phy-names. When phy-names is fixed, they should
disappear.
> sata-node itself seems to be defined in
> arch/arm64/boot/dts/marvell/armada-cp11x.dtsi (adress/size-cells and
> dma-coherent are defined here)
>
> iommus seems to be added with
> 83a3545d9c37 2020-07-15 arm64: dts: marvell: add SMMU support Marcin
> Wojtas (tag: mvebu-dt64-5.9-1)
> which seems not be documented in txt before i converted the binding.
>
> so something like adding this to the binding:
>
> '#address-cells':
> const: 1
>
> '#size-cells':
> const: 0
>
> dma-coherent: true
>
> iommus:
> maxItems: 1
>
> dma-coherent was there in my version and seem to be broken with
>
> 6f997d4bb98b 2022-09-09 dt-bindings: ata: ahci-platform: Move
> dma-coherent to sata-common.yaml Serge Semin
>
> but maybe i only get the error for it because of my call with my yaml
> only
>
> ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- make dtbs_check
> DT_SCHEMA_FILES=Documentation/devicetree/bindings/ata/ahci-platform.yaml
>
> adress/size-cells is strange to me, i'm sure i tested the yaml against
> the example which also contains them...i guess it was defined somewhere
> else.
>
> and this one:
>
> arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtb: sata@540000:
> sata-port@0:phy-names:0: 'sata-phy' was expected
> from schema $id: http://devicetree.org/schemas/ata/ahci-platform.yaml#
>
> i guess it is taken from here:
> Documentation/devicetree/bindings/ata/ahci-common.yaml:107:
> const: sata-phy
>
> if i understand it the right way then if phy-names is defined in
> sata-subnode it has to be value "sata-phy"...so basicly somewhere in the
> chains of dtsi's a phy-name is defined to another value..am i right?
>
> it looks like it is in
> arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi...if i drop the
> phy-names for the other sata-ports (below cp1_sata0)
>
> seems dropping them were missing from your patch as you remove another
> one in same file (&cp0_sata0)
Humm, not sure how I missed that. I was probably looking at warning
counts and the others registered higher.
Rob
