This patchset adds support for the MSPI controller on Cygnus. The existing MSPI driver in the kernel was written for BCMA which is a Broadcom AMBA bus variant used on certain chips such as the 53xx. This patch makes BCMA support optional. The current config is being renamed to make it chip nonspecific supporting BCMA, and a new config is added to support non-BCMA chips. DT support is now mandatory to allow removal of a hardcoded SPI device. Support is also added to set the baud rate. The controller currently runs at the slowest speed possible. Jonathan Richardson (4): ARM: dts: Add binding for Broadcom MSPI driver. spi: bcm53xx: Refactor to make driver nonspecific to 53xx SoCs spi: bcm-mspi: Make BCMA optional to support non-BCMA chips spi: bcm-mspi: Add support to set serial baud clock rate .../devicetree/bindings/spi/brcm,mspi-spi.txt | 38 ++ drivers/spi/Kconfig | 12 +- drivers/spi/Makefile | 3 +- drivers/spi/spi-bcm-mspi.c | 453 ++++++++++++++++++++ drivers/spi/spi-bcm-mspi.h | 84 ++++ drivers/spi/spi-bcm53xx.c | 299 ------------- drivers/spi/spi-bcm53xx.h | 72 ---- 7 files changed, 585 insertions(+), 376 deletions(-) create mode 100644 Documentation/devicetree/bindings/spi/brcm,mspi-spi.txt create mode 100644 drivers/spi/spi-bcm-mspi.c create mode 100644 drivers/spi/spi-bcm-mspi.h delete mode 100644 drivers/spi/spi-bcm53xx.c delete mode 100644 drivers/spi/spi-bcm53xx.h -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
