Hi Stan,
On 15:31 Tue 05 Nov , Andrea della Porta wrote:
> Hi Stan,
>
> On 15:29 Mon 04 Nov , Stanimir Varbanov wrote:
> > Hi Andrea,
> >
...
> > shouldn't this be:
> >
> > rp1_clocks: clocks@18000 {
> > reg = <0x00 0x00018000 0x0 0x10038>;
> > ...
> > }
> >
> > ?
> >
> > And for other nodes too...
>
> For that to be @18000 instead of @c040018000, you should also change
> the "ranges" entry in pci-ep-bus node, as follows:
>
> ranges = <0x00 0x00018000 //This was: 0xc0 0x40000000
> 0x01 0x00 0x00000000
> 0x00 0x00400000>;
>
> which is of course feasible, but I prefer to use addresses that
> resemble (at least to some extent) the ones in RP1 docs.
>
> Many thanks,
> Andrea
Sorry, this should be like this
ranges = <0x00 0x00000000 //This was: 0xc0 0x40000000
0x01 0x00 0x00000000
0x00 0x00400000>;
i.e. the child address in the range should be 0 and not 0x18000.
Anyway you got the point: in theory we can replace that address
with whatever placeholder we want and from a functional perspective,
it will work, as long as you change all the relevant mappings.
After some brainstorming we've decided to choose a simpler scheme
that will resemble more the internal address described in the RP1
reference manual. 0xC040000000 will become 0x40000000.
Many thanks,
Andrea
...
