[PATCH 28/31] arm64: dts: renesas: rzg3s-smarc-som: Add versa3 clock generator node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>

Add versa3 clock generator node. It provides the clocks for the Ethernet
PHY, PCIe, audio devices.

Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
---
 .../boot/dts/renesas/rzg3s-smarc-som.dtsi     | 30 +++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi
index 2ed01d391554..6e58d47d85b0 100644
--- a/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi
@@ -92,6 +92,12 @@ vcc_sdhi2: regulator2 {
 		gpios = <&pinctrl RZG2L_GPIO(8, 1) GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
+
+	x3_clk: x3-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
 };
 
 #if SW_CONFIG3 == SW_ON
@@ -152,6 +158,30 @@ &extal_clk {
 
 &i2c1 {
 	status = "okay";
+
+	versa3: clock-generator@68 {
+		compatible = "renesas,5l35023";
+		reg = <0x68>;
+		clocks = <&x3_clk>;
+		#clock-cells = <1>;
+		assigned-clocks = <&versa3 0>,
+				  <&versa3 1>,
+				  <&versa3 2>,
+				  <&versa3 3>,
+				  <&versa3 4>,
+				  <&versa3 5>;
+		assigned-clock-rates = <24000000>,
+				       <12288000>,
+				       <11289600>,
+				       <25000000>,
+				       <100000000>,
+				       <100000000>;
+		renesas,settings = [
+		  80 00 11 19 4c 42 dc 2f 06 7d 20 1a 5f 1e f2 27
+		  00 40 00 00 00 00 00 00 06 0c 19 02 3f f0 90 86
+		  a0 80 30 30 9c
+		];
+	};
 };
 
 #if SW_CONFIG2 == SW_ON
-- 
2.39.2





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux