From: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
Use readl_poll_timeout_atomic() instead of hardcoding something similar.
While at it replace dev_info() with dev_warn_ratelimited() as the
rz_ssi_set_idle() can also be called from IRQ context and if the SSI
idle is not properly set this is at least a warning for user.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
---
sound/soc/renesas/rz-ssi.c | 16 ++++++----------
1 file changed, 6 insertions(+), 10 deletions(-)
diff --git a/sound/soc/renesas/rz-ssi.c b/sound/soc/renesas/rz-ssi.c
index 47b82fe549ac..14d1edac6c34 100644
--- a/sound/soc/renesas/rz-ssi.c
+++ b/sound/soc/renesas/rz-ssi.c
@@ -9,6 +9,7 @@
#include <linux/clk.h>
#include <linux/dmaengine.h>
#include <linux/io.h>
+#include <linux/iopoll.h>
#include <linux/module.h>
#include <linux/pm_runtime.h>
#include <linux/reset.h>
@@ -307,7 +308,8 @@ static int rz_ssi_clk_setup(struct rz_ssi_priv *ssi, unsigned int rate,
static void rz_ssi_set_idle(struct rz_ssi_priv *ssi)
{
- int timeout;
+ u32 tmp;
+ int ret;
/* Disable irqs */
rz_ssi_reg_mask_setl(ssi, SSICR, SSICR_TUIEN | SSICR_TOIEN |
@@ -320,15 +322,9 @@ static void rz_ssi_set_idle(struct rz_ssi_priv *ssi)
SSISR_RUIRQ), 0);
/* Wait for idle */
- timeout = 100;
- while (--timeout) {
- if (rz_ssi_reg_readl(ssi, SSISR) & SSISR_IIRQ)
- break;
- udelay(1);
- }
-
- if (!timeout)
- dev_info(ssi->dev, "timeout waiting for SSI idle\n");
+ ret = readl_poll_timeout_atomic(ssi->base + SSISR, tmp, (tmp & SSISR_IIRQ), 1, 100);
+ if (ret)
+ dev_warn_ratelimited(ssi->dev, "timeout waiting for SSI idle\n");
/* Hold FIFOs in reset */
rz_ssi_reg_mask_setl(ssi, SSIFCR, SSIFCR_FIFO_RST, SSIFCR_FIFO_RST);
--
2.39.2
