From: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
The 5P35023 and 5L35035 Versa 3 clock generator variants are different but
the versaclock3 driver could be used with small adjustments. The features
that are implemented in driver and differs b/w variants are the PLL2 Fvco
and clock sel bit for SE2 clock. Adjust the driver to prepare for the
addition of 5L35023 device.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
---
drivers/clk/clk-versaclock3.c | 61 ++++++++++++++++++++++++-----------
1 file changed, 43 insertions(+), 18 deletions(-)
diff --git a/drivers/clk/clk-versaclock3.c b/drivers/clk/clk-versaclock3.c
index 76d7ea1964c3..1398d16df5d0 100644
--- a/drivers/clk/clk-versaclock3.c
+++ b/drivers/clk/clk-versaclock3.c
@@ -78,9 +78,6 @@
#define VC3_PLL1_VCO_MIN 300000000UL
#define VC3_PLL1_VCO_MAX 600000000UL
-#define VC3_PLL2_VCO_MIN 400000000UL
-#define VC3_PLL2_VCO_MAX 1200000000UL
-
#define VC3_PLL3_VCO_MIN 300000000UL
#define VC3_PLL3_VCO_MAX 800000000UL
@@ -147,9 +144,13 @@ struct vc3_pfd_data {
u8 mdiv2_bitmsk;
};
+struct vc3_vco {
+ unsigned long min;
+ unsigned long max;
+};
+
struct vc3_pll_data {
- unsigned long vco_min;
- unsigned long vco_max;
+ struct vc3_vco vco;
u8 num;
u8 int_div_msb_offs;
u8 int_div_lsb_offs;
@@ -166,12 +167,17 @@ struct vc3_div_data {
struct vc3_hw_data {
struct clk_hw hw;
struct regmap *regmap;
- const void *data;
+ void *data;
u32 div_int;
u32 div_frc;
};
+struct vc3_hw_cfg {
+ struct vc3_vco pll2_vco;
+ u32 se2_clk_sel_msk;
+};
+
static const struct clk_div_table div1_divs[] = {
{ .val = 0, .div = 1, }, { .val = 1, .div = 4, },
{ .val = 2, .div = 5, }, { .val = 3, .div = 6, },
@@ -386,10 +392,10 @@ static long vc3_pll_round_rate(struct clk_hw *hw, unsigned long rate,
const struct vc3_pll_data *pll = vc3->data;
u64 div_frc;
- if (rate < pll->vco_min)
- rate = pll->vco_min;
- if (rate > pll->vco_max)
- rate = pll->vco_max;
+ if (rate < pll->vco.min)
+ rate = pll->vco.min;
+ if (rate > pll->vco.max)
+ rate = pll->vco.max;
vc3->div_int = rate / *parent_rate;
@@ -680,8 +686,10 @@ static struct vc3_hw_data clk_pll[] = {
.num = VC3_PLL1,
.int_div_msb_offs = VC3_PLL1_LOOP_FILTER_N_DIV_MSB,
.int_div_lsb_offs = VC3_PLL1_VCO_N_DIVIDER,
- .vco_min = VC3_PLL1_VCO_MIN,
- .vco_max = VC3_PLL1_VCO_MAX
+ .vco = {
+ .min = VC3_PLL1_VCO_MIN,
+ .max = VC3_PLL1_VCO_MAX
+ }
},
.hw.init = &(struct clk_init_data) {
.name = "pll1",
@@ -698,8 +706,6 @@ static struct vc3_hw_data clk_pll[] = {
.num = VC3_PLL2,
.int_div_msb_offs = VC3_PLL2_FB_INT_DIV_MSB,
.int_div_lsb_offs = VC3_PLL2_FB_INT_DIV_LSB,
- .vco_min = VC3_PLL2_VCO_MIN,
- .vco_max = VC3_PLL2_VCO_MAX
},
.hw.init = &(struct clk_init_data) {
.name = "pll2",
@@ -716,8 +722,10 @@ static struct vc3_hw_data clk_pll[] = {
.num = VC3_PLL3,
.int_div_msb_offs = VC3_PLL3_LOOP_FILTER_N_DIV_MSB,
.int_div_lsb_offs = VC3_PLL3_N_DIVIDER,
- .vco_min = VC3_PLL3_VCO_MIN,
- .vco_max = VC3_PLL3_VCO_MAX
+ .vco = {
+ .min = VC3_PLL3_VCO_MIN,
+ .max = VC3_PLL3_VCO_MAX
+ }
},
.hw.init = &(struct clk_init_data) {
.name = "pll3",
@@ -901,7 +909,6 @@ static struct vc3_hw_data clk_mux[] = {
[VC3_SE2_MUX] = {
.data = &(struct vc3_clk_data) {
.offs = VC3_SE2_CTRL_REG0,
- .bitmsk = VC3_SE2_CTRL_REG0_SE2_CLK_SEL
},
.hw.init = &(struct clk_init_data) {
.name = "se2_mux",
@@ -982,6 +989,7 @@ static int vc3_probe(struct i2c_client *client)
{
struct device *dev = &client->dev;
u8 settings[NUM_CONFIG_REGISTERS];
+ const struct vc3_hw_cfg *data;
struct regmap *regmap;
const char *name;
int ret, i;
@@ -1029,9 +1037,16 @@ static int vc3_probe(struct i2c_client *client)
clk_pfd[i].hw.init->name);
}
+ data = i2c_get_match_data(client);
+
/* Register pll's */
for (i = 0; i < ARRAY_SIZE(clk_pll); i++) {
clk_pll[i].regmap = regmap;
+ if (i == VC3_PLL2) {
+ struct vc3_pll_data *pll_data = clk_pll[i].data;
+
+ pll_data->vco = data->pll2_vco;
+ }
ret = devm_clk_hw_register(dev, &clk_pll[i].hw);
if (ret)
return dev_err_probe(dev, ret, "%s failed\n",
@@ -1059,6 +1074,11 @@ static int vc3_probe(struct i2c_client *client)
/* Register clk muxes */
for (i = 0; i < ARRAY_SIZE(clk_mux); i++) {
clk_mux[i].regmap = regmap;
+ if (i == VC3_SE2_MUX) {
+ struct vc3_clk_data *clk_data = clk_mux[i].data;
+
+ clk_data->bitmsk = data->se2_clk_sel_msk;
+ }
ret = devm_clk_hw_register(dev, &clk_mux[i].hw);
if (ret)
return dev_err_probe(dev, ret, "%s failed\n",
@@ -1108,8 +1128,13 @@ static int vc3_probe(struct i2c_client *client)
return ret;
}
+static const struct vc3_hw_cfg vc3_5p = {
+ .pll2_vco = { .min = 400000000UL, .max = 1200000000UL },
+ .se2_clk_sel_msk = BIT(6),
+};
+
static const struct of_device_id dev_ids[] = {
- { .compatible = "renesas,5p35023" },
+ { .compatible = "renesas,5p35023", .data = &vc3_5p },
{ /* Sentinel */ }
};
MODULE_DEVICE_TABLE(of, dev_ids);
--
2.39.2
