The following patches from earlier rounds of this series have already been applied - https://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply.git/commit/?h=for-next&id=e7af7d13316dc5e2293c4f777f71bd8331f5d7a5 - https://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply.git/commit/?h=for-next&id=ce38cdc908557953604ffb0a91ef5ae3fbdf1c6b - https://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux.git/commit/?h=i2c/i2c-host&id=9114f5a4e63edd5ab1ba453799da335237cfc6f1 There may be complaints from some of the automated checkers about the mfd dt-binding patch until it shows up in the same tree as the i2c binding that is referred to. Chris Packham (4): dt-bindings: mfd: Add Realtek RTL9300 switch peripherals mips: dts: realtek: Add syscon-reboot node mips: dts: realtek: Add I2C controllers i2c: Add driver for the RTL9300 I2C controller .../bindings/mfd/realtek,rtl9301-switch.yaml | 114 +++++ MAINTAINERS | 7 + .../cameo-rtl9302c-2x-rtl8224-2xge.dts | 2 +- arch/mips/boot/dts/realtek/rtl9302c.dtsi | 15 + arch/mips/boot/dts/realtek/rtl930x.dtsi | 29 ++ drivers/i2c/busses/Kconfig | 10 + drivers/i2c/busses/Makefile | 1 + drivers/i2c/busses/i2c-rtl9300.c | 423 ++++++++++++++++++ 8 files changed, 600 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/mfd/realtek,rtl9301-switch.yaml create mode 100644 arch/mips/boot/dts/realtek/rtl9302c.dtsi create mode 100644 drivers/i2c/busses/i2c-rtl9300.c -- 2.47.0
