Both QCP and T14s have 2 NXP PTN3222 eUSB-to-USB2 redrivers used to level-shift
between the USB multi-port controller High-Speed PHY eUSB2 and the USB
Type-A ports connected to it. The QCP has a 3rd instance of this
redriver but is connected to the USB2S controller.
Describe the redrivers used for the USB multi-port and enable each pair
of PHYS and controller in order to enable USB support on those 2 Type-A ports
on each board.
Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx>
---
Abel Vesa (2):
arm64: dts: qcom: x1e78100-t14s: Enable support for both Type-A USB ports
arm64: dts: qcom: x1e78100-qcp: Enable Type-A USB ports labeled 3 and 4/6
.../dts/qcom/x1e78100-lenovo-thinkpad-t14s.dts | 86 ++++++++++++++++++++++
arch/arm64/boot/dts/qcom/x1e80100-qcp.dts | 86 ++++++++++++++++++++++
2 files changed, 172 insertions(+)
---
base-commit: 850f22c42f4b0a14a015aecc26f46f9948ded6dd
change-id: 20241105-x1e80100-qcp-t14-enable-usb-type-a-ports-552ced3b4430
Best regards,
--
Abel Vesa <abel.vesa@xxxxxxxxxx>
