On Fri, Nov 01, 2024 at 02:51:29PM -0500, Bjorn Helgaas wrote:
> On Wed, Aug 14, 2024 at 09:08:42AM +0100, Conor Dooley wrote:
> > From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
> >
> > The PCI host controller on PolarFire SoC has multiple "instances", each
> > with their own bridge and ctrl address spaces. The original binding has
> > an "apb" register region, and it is expected to be set to the base
> > address of the host controllers register space. Defines in the driver
> > were used to compute the addresses of the bridge and ctrl address ranges
> > corresponding to instance1. Some customers want to use instance0 however
> > and that requires changing the defines in the driver, which is clearly
> > not a portable solution.
>
> The subject mentions "instance 1 or 2".
>
> This paragraph implies adding support for "instance0" ("customers want
> to use instance0").
>
> The DT patch suggests that we're adding support for "instance2"
> ("customers want to use instance2").
>
> Both patches suggest that the existing support is for "instance 1".
>
> Maybe what's being added is "instance 2", and this commit log should
> s/instance0/instance 2/ ? And probably s/instance1/instance 1/ so the
> style is consistent?
Hmm no, it would be s/instance1/instance 2/ & s/instance0/instance 1/.
The indices are 1-based, not 0-based.
> Is this a "pick one or the other but not both" situation, or does this
> device support two independent PCIe controllers?
>
> I first thought this driver supported a single PCIe controller, and
> you were adding support for a second independent controller.
>
I don't know if they are fully independent (Daire would have to confirm)
but as far as the driver in linux is concerned they are. As far as I
know, you could operate both instances at the same time, but I've not
heard of any customer that is actually doing that nor tested it myself.
Operating both instances would require another node in the devicetree,
which should work fine given the private data structs are allocated at
runtime. I think the config space is shared.
> But the fact that you say "the [singular] host controller on
> PolarFire", and you're not changing mc_host_probe() to call
> pci_host_common_probe() more than once makes me think there is only a
> single PCIe controller, and for some reason you can choose to operate
> it using either register set 1 or register set 2.
The wording I've used mostly stems from conversations with Daire. We've
kinda been saying that there's a single controller with two root port
instances. Each root port instance is connected to different IOs,
they're more than just different registers for accessing the same thing.
Attachment:
signature.asc
Description: PGP signature
