RE: [PATCH v7 4/7] PCI: imx6: Remove cpu_addr_fixup()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> -----Original Message-----
> From: Frank Li <frank.li@xxxxxxx>
> Sent: 2024年10月30日 0:37
> To: Rob Herring <robh@xxxxxxxxxx>; Saravana Kannan
> <saravanak@xxxxxxxxxx>; Jingoo Han <jingoohan1@xxxxxxxxx>;
> Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>; Lorenzo
> Pieralisi <lpieralisi@xxxxxxxxxx>; Krzysztof Wilczyński <kw@xxxxxxxxx>; Bjorn
> Helgaas <bhelgaas@xxxxxxxxxx>; Hongxing Zhu <hongxing.zhu@xxxxxxx>;
> Lucas Stach <l.stach@xxxxxxxxxxxxxx>; Shawn Guo <shawnguo@xxxxxxxxxx>;
> Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>; Pengutronix Kernel Team
> <kernel@xxxxxxxxxxxxxx>; Fabio Estevam <festevam@xxxxxxxxx>
> Cc: devicetree@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx;
> linux-pci@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx;
> imx@xxxxxxxxxxxxxxx; Frank Li <frank.li@xxxxxxx>
> Subject: [PATCH v7 4/7] PCI: imx6: Remove cpu_addr_fixup()
> 
> Remove cpu_addr_fixup() because dwc common driver already handle
> address translate.
> 
> Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
Acked-by: Richard Zhu <hongxing.zhu@xxxxxxx>

Best Regards
Richard Zhu
> ---
> Change from v2 to v7
> - none
> Change from v1 to v2
> - set using_dtbus_info true
> ---
>  drivers/pci/controller/dwc/pci-imx6.c | 22 ++--------------------
>  1 file changed, 2 insertions(+), 20 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pci-imx6.c
> b/drivers/pci/controller/dwc/pci-imx6.c
> index 808d1f1054173..533905b3942a1 100644
> --- a/drivers/pci/controller/dwc/pci-imx6.c
> +++ b/drivers/pci/controller/dwc/pci-imx6.c
> @@ -81,7 +81,6 @@ enum imx_pcie_variants {
>  #define IMX_PCIE_FLAG_HAS_PHY_RESET		BIT(5)
>  #define IMX_PCIE_FLAG_HAS_SERDES		BIT(6)
>  #define IMX_PCIE_FLAG_SUPPORT_64BIT		BIT(7)
> -#define IMX_PCIE_FLAG_CPU_ADDR_FIXUP		BIT(8)
> 
>  #define imx_check_flag(pci, val)	(pci->drvdata->flags & val)
> 
> @@ -1012,22 +1011,6 @@ static void imx_pcie_host_exit(struct dw_pcie_rp
> *pp)
>  		regulator_disable(imx_pcie->vpcie);
>  }
> 
> -static u64 imx_pcie_cpu_addr_fixup(struct dw_pcie *pcie, u64 cpu_addr) -{
> -	struct imx_pcie *imx_pcie = to_imx_pcie(pcie);
> -	struct dw_pcie_rp *pp = &pcie->pp;
> -	struct resource_entry *entry;
> -
> -	if (!(imx_pcie->drvdata->flags & IMX_PCIE_FLAG_CPU_ADDR_FIXUP))
> -		return cpu_addr;
> -
> -	entry = resource_list_first_type(&pp->bridge->windows,
> IORESOURCE_MEM);
> -	if (!entry)
> -		return cpu_addr;
> -
> -	return cpu_addr - entry->offset;
> -}
> -
>  static const struct dw_pcie_host_ops imx_pcie_host_ops = {
>  	.init = imx_pcie_host_init,
>  	.deinit = imx_pcie_host_exit,
> @@ -1036,7 +1019,6 @@ static const struct dw_pcie_host_ops
> imx_pcie_host_ops = {  static const struct dw_pcie_ops dw_pcie_ops = {
>  	.start_link = imx_pcie_start_link,
>  	.stop_link = imx_pcie_stop_link,
> -	.cpu_addr_fixup = imx_pcie_cpu_addr_fixup,
>  };
> 
>  static void imx_pcie_ep_init(struct dw_pcie_ep *ep) @@ -1446,6 +1428,7
> @@ static int imx_pcie_probe(struct platform_device *pdev)
>  	if (ret)
>  		return ret;
> 
> +	pci->using_dtbus_info = true;
>  	if (imx_pcie->drvdata->mode == DW_PCIE_EP_TYPE) {
>  		ret = imx_add_pcie_ep(imx_pcie, pdev);
>  		if (ret < 0)
> @@ -1585,8 +1568,7 @@ static const struct imx_pcie_drvdata drvdata[] = {
>  	},
>  	[IMX8Q] = {
>  		.variant = IMX8Q,
> -		.flags = IMX_PCIE_FLAG_HAS_PHYDRV |
> -			 IMX_PCIE_FLAG_CPU_ADDR_FIXUP,
> +		.flags = IMX_PCIE_FLAG_HAS_PHYDRV,
>  		.clk_names = imx8q_clks,
>  		.clks_cnt = ARRAY_SIZE(imx8q_clks),
>  	},
> 
> --
> 2.34.1





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux