[PATCH v4 4/6] iio: light: stk3310: use dev_err_probe where possible

[Aren Moynihan <aren@xxxxxxxxxxxxxxxxx>]

Using dev_err_probe instead of dev_err and return makes the errors
easier to understand by including the error name, and saves a little
code.

Signed-off-by: Aren Moynihan <aren@xxxxxxxxxxxxxxxxx>
---

Notes:
    Changes in v4:
     - Get a struct device ahead of time so it can be passed as "dev"
       instead of "&client->dev"
    
    No changes in v3
    
    Added in v2

 drivers/iio/light/stk3310.c | 61 ++++++++++++++++---------------------
 1 file changed, 26 insertions(+), 35 deletions(-)

diff --git a/drivers/iio/light/stk3310.c b/drivers/iio/light/stk3310.c
index f93689c61f44..c9a3f02bdd80 100644
--- a/drivers/iio/light/stk3310.c
+++ b/drivers/iio/light/stk3310.c
@@ -61,12 +61,12 @@
 #define STK3310_REGFIELD(name)						    \
 	do {								    \
 		data->reg_##name =					    \
-			devm_regmap_field_alloc(&client->dev, regmap,	    \
+			devm_regmap_field_alloc(dev, regmap,		    \
 				stk3310_reg_field_##name);		    \
-		if (IS_ERR(data->reg_##name)) {				    \
-			dev_err(&client->dev, "reg field alloc failed.\n"); \
-			return PTR_ERR(data->reg_##name);		    \
-		}							    \
+		if (IS_ERR(data->reg_##name))				    \
+			return dev_err_probe(dev,			    \
+				PTR_ERR(data->reg_##name),		    \
+				"reg field alloc failed.\n");		    \
 	} while (0)
 
 static const struct reg_field stk3310_reg_field_state =
@@ -517,10 +517,8 @@ static int stk3310_init(struct iio_dev *indio_dev)
 
 	state = STK3310_STATE_EN_ALS | STK3310_STATE_EN_PS;
 	ret = stk3310_set_state(data, state);
-	if (ret < 0) {
-		dev_err(&client->dev, "failed to enable sensor");
-		return ret;
-	}
+	if (ret < 0)
+		return dev_err_probe(dev, ret, "failed to enable sensor\n");
 
 	ret = devm_add_action_or_reset(&client->dev, stk3310_set_state_disable, data);
 	if (ret)
@@ -529,9 +527,9 @@ static int stk3310_init(struct iio_dev *indio_dev)
 	/* Enable PS interrupts */
 	ret = regmap_field_write(data->reg_int_ps, STK3310_PSINT_EN);
 	if (ret < 0)
-		dev_err(&client->dev, "failed to enable interrupts!\n");
+		return dev_err_probe(dev, ret, "failed to enable interrupts!\n");
 
-	return ret;
+	return 0;
 }
 
 static bool stk3310_is_volatile_reg(struct device *dev, unsigned int reg)
@@ -560,14 +558,14 @@ static const struct regmap_config stk3310_regmap_config = {
 static int stk3310_regmap_init(struct stk3310_data *data)
 {
 	struct regmap *regmap;
-	struct i2c_client *client;
+	struct i2c_client *client = data->client;
+	struct device *dev = &client->dev;
 
-	client = data->client;
 	regmap = devm_regmap_init_i2c(client, &stk3310_regmap_config);
-	if (IS_ERR(regmap)) {
-		dev_err(&client->dev, "regmap initialization failed.\n");
-		return PTR_ERR(regmap);
-	}
+	if (IS_ERR(regmap))
+		return dev_err_probe(dev, PTR_ERR(regmap),
+				     "regmap initialization failed.\n");
+
 	data->regmap = regmap;
 
 	STK3310_REGFIELD(state);
@@ -654,12 +652,11 @@ static int stk3310_probe(struct i2c_client *client)
 	int ret;
 	struct iio_dev *indio_dev;
 	struct stk3310_data *data;
+	struct device *dev = &client->dev;
 
 	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
-	if (!indio_dev) {
-		dev_err(&client->dev, "iio allocation failed!\n");
-		return -ENOMEM;
-	}
+	if (!indio_dev)
+		return dev_err_probe(dev, -ENOMEM, "iio allocation failed!\n");
 
 	data = iio_priv(indio_dev);
 	data->client = client;
@@ -675,7 +672,7 @@ static int stk3310_probe(struct i2c_client *client)
 	ret = devm_regulator_bulk_get(&client->dev, ARRAY_SIZE(data->supplies),
 				      data->supplies);
 	if (ret)
-		return dev_err_probe(&client->dev, ret, "get regulators failed\n");
+		return dev_err_probe(dev, ret, "get regulators failed\n");
 
 	ret = stk3310_regmap_init(data);
 	if (ret < 0)
@@ -689,13 +686,11 @@ static int stk3310_probe(struct i2c_client *client)
 
 	ret = stk3310_regulators_enable(data);
 	if (ret)
-		return dev_err_probe(&client->dev, ret,
-				     "regulator enable failed\n");
+		return dev_err_probe(dev, ret, "regulator enable failed\n");
 
 	ret = devm_add_action_or_reset(&client->dev, stk3310_regulators_disable, data);
 	if (ret)
-		return dev_err_probe(&client->dev, ret,
-				     "failed to register regulator cleanup\n");
+		return dev_err_probe(dev, ret, "failed to register regulator cleanup\n");
 
 	ret = stk3310_init(indio_dev);
 	if (ret < 0)
@@ -708,18 +703,14 @@ static int stk3310_probe(struct i2c_client *client)
 						IRQF_TRIGGER_FALLING |
 						IRQF_ONESHOT,
 						STK3310_EVENT, indio_dev);
-		if (ret < 0) {
-			dev_err(&client->dev, "request irq %d failed\n",
-				client->irq);
-			return ret;
-		}
+		if (ret < 0)
+			return dev_err_probe(dev, ret, "request irq %d failed\n",
+					     client->irq);
 	}
 
 	ret = devm_iio_device_register(&client->dev, indio_dev);
-	if (ret < 0) {
-		dev_err(&client->dev, "device_register failed\n");
-		return ret;
-	}
+	if (ret < 0)
+		return dev_err_probe(dev, ret, "device_register failed\n");
 
 	return 0;
 }
-- 
2.47.0