Add new SoC dtsi file for the RK3566T variant of the Rockchip RK3566 SoC. The difference between the RK3566T variant and the "full-fat" RK3566 variant is in fewer supported CPU and GPU OPPs on the RK3566T, and in the absence of a functional NPU, which we currently don't have to worry about. Examples of the boards based on the RK3566T include the Pine64 Quartz64 Zero SBC, [1] which is yet to be supported, the Radxa ROCK 3C, and the Radxa ZERO 3E/3W SBCs, which are both already supported. Though, Radxa doesn't mention the use of RK3566T officially, but its official SBC specifications do state that the maximum frequency for the Cortex-A55 cores on those SBCs is lower than the "full-fat" RK3566's 1.8 GHz, which makes spotting the presence of the RK3566T SoC variant rather easy. [2][3][4] An additional, helpful cue is that Radxa handles the CPU and GPU OPPs for the RK3566T variant separately in its downstream kernel source. [5] The CPU and GPU OPPs supported on the RK3566T SoC variant are taken from the vendor kernel source, [6] which uses the values of the "opp-supported-hw" OPP properties to determine which ones are supported on a particular SoC variant. The actual values of the "opp-supported-hw" properties make it rather easy to see what OPPs are supported on the RK3566T SoC variant, but that, rather unfortunately, clashes with the maximum frequencies advertised officially for the Cortex-A55 CPU cores on the above-mentioned SBCs. [1][2][3][4] The vendor kernel source indicates that the maximum frequency for the CPU cores is 1.4 GHz, while the SBC specifications state that to be 1.6 GHz. Until that discrepancy is resolved somehow, let's take the safe approach and use the lower maximum frequency for the CPU cores. Update the dts files of the currently supported RK3566T-based boards to use the new SoC dtsi for the RK3566T variant. This actually takes the CPU cores and the GPUs found on these boards out of their earlier overclocks, but it also means that the officially advertised specifications [1][2][3][4] of the highest supported frequencies for the Cortex-A55 CPU cores on these boards may actually be wrong, as already explained above. The correctness of the introduced changes was validated by decompiling and comparing all affected board dtb files before and after these changes. [1] https://wiki.pine64.org/wiki/Quartz64 [2] https://dl.radxa.com/rock3/docs/hw/3c/radxa_rock3c_product_brief.pdf [3] https://dl.radxa.com/zero3/docs/hw/3e/radxa_zero_3e_product_brief.pdf [4] https://dl.radxa.com/zero3/docs/hw/3w/radxa_zero_3w_product_brief.pdf [5] https://github.com/radxa/kernel/commit/2dfd51da472e7ebb5ef0d3db78f902454af826b8 [6] https://raw.githubusercontent.com/rockchip-linux/kernel/f8b9431ee38ed561650be7092ab93f564598daa9/arch/arm64/boot/dts/rockchip/rk3568.dtsi Cc: TL Lim <tllim@xxxxxxxxxx> Cc: Marek Kraus <gamiee@xxxxxxxxxx> Cc: Tom Cubie <tom@xxxxxxxxx> Cc: FUKAUMI Naoki <naoki@xxxxxxxxx> Helped-by: Nicolas Frattaroli <frattaroli.nicolas@xxxxxxxxx> Helped-by: Jonas Karlman <jonas@xxxxxxxxx> Signed-off-by: Dragan Simic <dsimic@xxxxxxxxxxx> --- .../dts/rockchip/rk3566-radxa-zero-3.dtsi | 2 +- .../boot/dts/rockchip/rk3566-rock-3c.dts | 2 +- arch/arm64/boot/dts/rockchip/rk3566t.dtsi | 90 +++++++++++++++++++ 3 files changed, 92 insertions(+), 2 deletions(-) create mode 100644 arch/arm64/boot/dts/rockchip/rk3566t.dtsi diff --git a/arch/arm64/boot/dts/rockchip/rk3566-radxa-zero-3.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-radxa-zero-3.dtsi index de390d92c35e..1ee5d96a46a1 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-radxa-zero-3.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-zero-3.dtsi @@ -3,7 +3,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/leds/common.h> #include <dt-bindings/soc/rockchip,vop2.h> -#include "rk3566.dtsi" +#include "rk3566t.dtsi" / { chosen { diff --git a/arch/arm64/boot/dts/rockchip/rk3566-rock-3c.dts b/arch/arm64/boot/dts/rockchip/rk3566-rock-3c.dts index f2cc086e5001..9a8f4f774dbc 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-rock-3c.dts +++ b/arch/arm64/boot/dts/rockchip/rk3566-rock-3c.dts @@ -5,7 +5,7 @@ #include <dt-bindings/leds/common.h> #include <dt-bindings/pinctrl/rockchip.h> #include <dt-bindings/soc/rockchip,vop2.h> -#include "rk3566.dtsi" +#include "rk3566t.dtsi" / { model = "Radxa ROCK 3C"; diff --git a/arch/arm64/boot/dts/rockchip/rk3566t.dtsi b/arch/arm64/boot/dts/rockchip/rk3566t.dtsi new file mode 100644 index 000000000000..cd89bd3b125b --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3566t.dtsi @@ -0,0 +1,90 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +#include "rk3566-base.dtsi" + +/ { + cpu0_opp_table: opp-table-0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-408000000 { + opp-hz = /bits/ 64 <408000000>; + opp-microvolt = <850000 850000 1150000>; + clock-latency-ns = <40000>; + }; + + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <850000 850000 1150000>; + clock-latency-ns = <40000>; + }; + + opp-816000000 { + opp-hz = /bits/ 64 <816000000>; + opp-microvolt = <850000 850000 1150000>; + clock-latency-ns = <40000>; + opp-suspend; + }; + + opp-1104000000 { + opp-hz = /bits/ 64 <1104000000>; + opp-microvolt = <900000 900000 1150000>; + clock-latency-ns = <40000>; + }; + + opp-1416000000 { + opp-hz = /bits/ 64 <1416000000>; + opp-microvolt = <1025000 1025000 1150000>; + clock-latency-ns = <40000>; + }; + }; + + gpu_opp_table: opp-table-1 { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + opp-microvolt = <850000 850000 1000000>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <850000 850000 1000000>; + }; + + opp-400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-microvolt = <850000 850000 1000000>; + }; + + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <900000 900000 1000000>; + }; + + opp-700000000 { + opp-hz = /bits/ 64 <700000000>; + opp-microvolt = <950000 950000 1000000>; + }; + }; +}; + +&cpu0 { + operating-points-v2 = <&cpu0_opp_table>; +}; + +&cpu1 { + operating-points-v2 = <&cpu0_opp_table>; +}; + +&cpu2 { + operating-points-v2 = <&cpu0_opp_table>; +}; + +&cpu3 { + operating-points-v2 = <&cpu0_opp_table>; +}; + +&gpu { + operating-points-v2 = <&gpu_opp_table>; +};