On 11/1/24 6:23 AM, Antoniu Miclaus wrote:
> Add support for selecting the data format within the AXI ADC ip.
>
> Signed-off-by: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
> ---
> no changes in v5.
> drivers/iio/adc/adi-axi-adc.c | 22 ++++++++++++++++++++++
> 1 file changed, 22 insertions(+)
>
> diff --git a/drivers/iio/adc/adi-axi-adc.c b/drivers/iio/adc/adi-axi-adc.c
> index f6475bc93796..6f658d9b4c9d 100644
> --- a/drivers/iio/adc/adi-axi-adc.c
> +++ b/drivers/iio/adc/adi-axi-adc.c
> @@ -45,6 +45,9 @@
> #define ADI_AXI_ADC_REG_CTRL 0x0044
> #define ADI_AXI_ADC_CTRL_DDR_EDGESEL_MASK BIT(1)
>
> +#define ADI_AXI_ADC_REG_CNTRL_3 0x004c
> +#define ADI_AXI_ADC_CNTRL_3_CUSTOM_CTRL_MSK GENMASK(7, 0)
> +
> #define ADI_AXI_ADC_REG_DRP_STATUS 0x0074
> #define ADI_AXI_ADC_DRP_LOCKED BIT(17)
>
> @@ -312,6 +315,24 @@ static int axi_adc_interface_type_get(struct iio_backend *back,
> return 0;
> }
>
> +static int axi_adc_data_size_set(struct iio_backend *back, ssize_t size)
> +{
> + struct adi_axi_adc_state *st = iio_backend_get_priv(back);
> + unsigned int val;
> +
> + if (size <= 20)
> + val = 0;
> + else if (size <= 24)
> + val = 1;
> + else if (size <= 32)
> + val = 3;
Should these be exact matches instead of "<="?
Also, what would val = 2 mean? Perhaps we need some macros to explain
the meanings of these values. The docs linked below give the meaning
for a different chip, but not AD485x.
> + else
> + return -EINVAL;
> +
> + return regmap_update_bits(st->regmap, ADI_AXI_ADC_REG_CNTRL_3,
> + ADI_AXI_ADC_CNTRL_3_CUSTOM_CONTROL_MSK, val);
My understanding is that the use of REG_CHAN_CNTRL_3 is different
for every HDL project depending on what (frontend) chip is is being
used with. In the AXI DAC, we added a new compatible string for this
(and other reasons). Not sure if we need to go that far here, but I
would at least put a comment here explaining that this use of the
register is highly specific to the AXI AD485x variant [1] of the
AXI ADC IP core.
Ideally though, there should be an ID register that we can read
to get this info or use a different DT compatible string.
[1]: http://analogdevicesinc.github.io/hdl/library/axi_ad485x/index.html
> +}
> +
> static struct iio_buffer *axi_adc_request_buffer(struct iio_backend *back,
> struct iio_dev *indio_dev)
> {
> @@ -360,6 +381,7 @@ static const struct iio_backend_ops adi_axi_adc_ops = {
> .test_pattern_set = axi_adc_test_pattern_set,
> .chan_status = axi_adc_chan_status,
> .interface_type_get = axi_adc_interface_type_get,
> + .data_size_set = axi_adc_data_size_set,
> .debugfs_reg_access = iio_backend_debugfs_ptr(axi_adc_reg_access),
> .debugfs_print_chan_status = iio_backend_debugfs_ptr(axi_adc_debugfs_print_chan_status),
> };
