[PATCH v3 0/3] Apple SPI controller driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi all,

This updated series address the review comments from the original
submission in 2021 [1]. It adds a new SPI controller driver for Apple
SoCs and is based on spi-sifive. It has been tested with the generic
jedec,spi-nor support and with a downstream driver for an Apple specific
HID over SPI transport.

As usual, I'm splitting off the MAINTAINERS and DT binding changes.
We would rather merge the MAINTAINERS change through the Asahi-SoC
tree to avoid merge conflicts as things trickle upstream, since
we have other submissions touching that section of the file.

The DT binding change can go via the SPI tree or via ours, but it's
easier if we merge it, as then we can make the DT changes to
instantiate it without worrying about DT validation failures depending
on merge order.

This is mostly Hector's work with a few minor changes to address review
comments from me.

[1] https://lore.kernel.org/linux-spi/20211212034726.26306-1-marcan@xxxxxxxxx/

v2:
- removed '#address-cells' and '#size-cells' from the bindings and added
  Rob's Rb:
- fixed (new) checkpatch warnings
- added t8112 (M2) SoC
- shorted long and complex source code lines
- switch to devm_clk_prepare_enable() and devm_pm_runtime_enable()
- switch to dev_err_probe() in probe function
- removed "pdev->dev.dma_mask = NULL;"
- got rid of apple_spi_remove()

Signed-off-by: Janne Grunau <j@xxxxxxxxxx>
---
Changes in v3:
- fixed bindings_check warning
- converted top file comment to C++ style comments
- dropped verbose dev_err_probe after failed devm_* function
- stopped setting field in zero initialized struct to 0
- added error handling for devm_pm_runtime_enable()
- Link to v2: https://lore.kernel.org/r/20241101-asahi-spi-v2-0-763a8a84d834@xxxxxxxxxx

Changes in v2:
- removed '#address-cells' and '#size-cells' from the bindings and added
  Rob's Rb:
- fixed (new) checkpatch warnings
- added t8112 (M2) SoC
- shorted long and complex source code lines
- switch to devm_clk_prepare_enable() and devm_pm_runtime_enable()
- switch to dev_err_probe() in probe function
- removed "pdev->dev.dma_mask = NULL;"
- got rid of apple_spi_remove()
- Link to v1: https://lore.kernel.org/linux-spi/20211212034726.26306-1-marcan@xxxxxxxxx/

---
Hector Martin (3):
      dt-bindings: spi: apple,spi: Add binding for Apple SPI controllers
      spi: apple: Add driver for Apple SPI controller
      MAINTAINERS: Add apple-spi driver & binding files

 .../devicetree/bindings/spi/apple,spi.yaml         |  62 +++
 MAINTAINERS                                        |   2 +
 drivers/spi/Kconfig                                |  11 +
 drivers/spi/Makefile                               |   1 +
 drivers/spi/spi-apple.c                            | 531 +++++++++++++++++++++
 5 files changed, 607 insertions(+)
---
base-commit: 98f7e32f20d28ec452afb208f9cffc08448a2652
change-id: 20240811-asahi-spi-f8740ba797d7

Best regards,
-- 
Janne Grunau <j@xxxxxxxxxx>






[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux