[PATCH] arm64: dts: ti: k3-am642-hummingboard-t: convert overlay to board dts

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



SolidRun HummingBoard-T has two options for M.2 connector, supporting
either PCI-E or USB-3.1 Gen 1 - depending on configuration of a mux
on the serdes lane.
The required configurations in device-tree were modeled as overlays.

The USB-3.1 overlay uses /delete-property/ to unset a boolean property
on the usb controller limiting it to USB-2.0 by default.
Overlays can not delete a property from the base dtb, therefore this
overlay is at this time useless.

Convert both overlays into full dts by including the base board dts.
While the pcie overlay was functional, both are converted for a
consistent user experience when selecting between the two mutually
exclusive configurations.

Reported-by: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
Closes: https://lore.kernel.org/linux-devicetree/CAMuHMdXTgpTnJ9U7egC2XjFXXNZ5uiY1O+WxNd6LPJW5Rs5KTw@xxxxxxxxxxxxxx
Fixes: bbef42084cc1 ("arm64: dts: ti: hummingboard-t: add overlays for m.2 pci-e and usb-3")
Signed-off-by: Josua Mayer <josua@xxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/ti/Makefile                            |  4 ----
 ...gboard-t-pcie.dtso => k3-am642-hummingboard-t-pcie.dts} | 14 ++++++++------
 ...gboard-t-usb3.dtso => k3-am642-hummingboard-t-usb3.dts} | 13 ++++++++-----
 3 files changed, 16 insertions(+), 15 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index bcd392c3206e50a0b4082118fd13c3a7a0c1d291..562e6d57bc9919393920afe684a61a8ab58dcc21 100644
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -41,10 +41,6 @@ dtb-$(CONFIG_ARCH_K3) += k3-am62x-sk-csi2-imx219.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-am62x-sk-hdmi-audio.dtbo
 
 # Boards with AM64x SoC
-k3-am642-hummingboard-t-pcie-dtbs := \
-	k3-am642-hummingboard-t.dtb k3-am642-hummingboard-t-pcie.dtbo
-k3-am642-hummingboard-t-usb3-dtbs := \
-	k3-am642-hummingboard-t.dtb k3-am642-hummingboard-t-usb3.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-am642-evm.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am642-evm-icssg1-dualemac.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-am642-evm-icssg1-dualemac-mii.dtbo
diff --git a/arch/arm64/boot/dts/ti/k3-am642-hummingboard-t-pcie.dtso b/arch/arm64/boot/dts/ti/k3-am642-hummingboard-t-pcie.dts
similarity index 78%
rename from arch/arm64/boot/dts/ti/k3-am642-hummingboard-t-pcie.dtso
rename to arch/arm64/boot/dts/ti/k3-am642-hummingboard-t-pcie.dts
index bd9a5caf20da5b7f11266575f69f0f5dcc1a47ae..023b2a6aaa56689f712a6c1ede6ba427d746fe34 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-hummingboard-t-pcie.dtso
+++ b/arch/arm64/boot/dts/ti/k3-am642-hummingboard-t-pcie.dts
@@ -2,17 +2,19 @@
 /*
  * Copyright (C) 2023 Josua Mayer <josua@xxxxxxxxxxxxx>
  *
- * Overlay for SolidRun AM642 HummingBoard-T to enable PCI-E.
+ * DTS for SolidRun AM642 HummingBoard-T,
+ * running on Cortex A53, with PCI-E.
+ *
  */
 
-/dts-v1/;
-/plugin/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/phy/phy.h>
+#include "k3-am642-hummingboard-t.dts"
 
 #include "k3-serdes.h"
 
+/ {
+	model = "SolidRun AM642 HummingBoard-T with PCI-E";
+};
+
 &pcie0_rc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie0_default_pins>;
diff --git a/arch/arm64/boot/dts/ti/k3-am642-hummingboard-t-usb3.dtso b/arch/arm64/boot/dts/ti/k3-am642-hummingboard-t-usb3.dts
similarity index 74%
rename from arch/arm64/boot/dts/ti/k3-am642-hummingboard-t-usb3.dtso
rename to arch/arm64/boot/dts/ti/k3-am642-hummingboard-t-usb3.dts
index ffcc3bd3c7bc5d47ce9926a95a13af3f61182a2b..ee9bd618f3701047be4ac7502cb70e7d3589ff5d 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-hummingboard-t-usb3.dtso
+++ b/arch/arm64/boot/dts/ti/k3-am642-hummingboard-t-usb3.dts
@@ -2,16 +2,19 @@
 /*
  * Copyright (C) 2023 Josua Mayer <josua@xxxxxxxxxxxxx>
  *
- * Overlay for SolidRun AM642 HummingBoard-T to enable USB-3.1.
+ * DTS for SolidRun AM642 HummingBoard-T,
+ * running on Cortex A53, with USB-3.1 Gen 1.
+ *
  */
 
-/dts-v1/;
-/plugin/;
-
-#include <dt-bindings/phy/phy.h>
+#include "k3-am642-hummingboard-t.dts"
 
 #include "k3-serdes.h"
 
+/ {
+	model = "SolidRun AM642 HummingBoard-T with USB-3.1 Gen 1";
+};
+
 &serdes0 {
 	#address-cells = <1>;
 	#size-cells = <0>;

---
base-commit: 9852d85ec9d492ebef56dc5f229416c925758edc
change-id: 20241101-am64-hb-fix-overlay-5c3074974008

Best regards,
-- 
Josua Mayer <josua@xxxxxxxxxxxxx>





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux