[PATCH v6 07/10] PCI: imx6: Clean up codes by removing imx7d_pcie_init_phy()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Remove the duplicate imx7d_pcie_init_phy() function as it is the same as
imx7d_pcie_enable_ref_clk().

Signed-off-by: Richard Zhu <hongxing.zhu@xxxxxxx>
Reviewed-by: Frank Li <Frank.Li@xxxxxxx>
---
 drivers/pci/controller/dwc/pci-imx6.c | 8 --------
 1 file changed, 8 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index bb130c84c016..fde2f4eaf804 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -390,13 +390,6 @@ static int imx8mq_pcie_init_phy(struct imx_pcie *imx_pcie)
 	return 0;
 }
 
-static int imx7d_pcie_init_phy(struct imx_pcie *imx_pcie)
-{
-	regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR12, IMX7D_GPR12_PCIE_PHY_REFCLK_SEL, 0);
-
-	return 0;
-}
-
 static int imx_pcie_init_phy(struct imx_pcie *imx_pcie)
 {
 	regmap_update_bits(imx_pcie->iomuxc_gpr, IOMUXC_GPR12,
@@ -1526,7 +1519,6 @@ static const struct imx_pcie_drvdata drvdata[] = {
 		.clks_cnt = ARRAY_SIZE(imx6q_clks),
 		.mode_off[0] = IOMUXC_GPR12,
 		.mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
-		.init_phy = imx7d_pcie_init_phy,
 		.enable_ref_clk = imx7d_pcie_enable_ref_clk,
 		.core_reset = imx7d_pcie_core_reset,
 	},
-- 
2.37.1





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux