On Thu, Oct 31, 2024 at 10:35:55AM +0200, Ciprian Costea wrote:
> From: Ciprian Marian Costea <ciprianmarian.costea@xxxxxxxxxxx>
>
> Add a RTC driver for NXP S32G2/S32G3 SoCs.
>
> The RTC module is used to enable Suspend to RAM (STR) support
> on NXP S32G2/S32G3 SoC based boards.
> RTC tracks clock time during system suspend.
>
> RTC from S32G2/S32G3 is not battery-powered and it is not
> kept alive during system reset.
wrap at 75 chars.
>
> Co-developed-by: Bogdan Hamciuc <bogdan.hamciuc@xxxxxxx>
> Signed-off-by: Bogdan Hamciuc <bogdan.hamciuc@xxxxxxx>
> Co-developed-by: Ghennadi Procopciuc <Ghennadi.Procopciuc@xxxxxxx>
> Signed-off-by: Ghennadi Procopciuc <Ghennadi.Procopciuc@xxxxxxx>
> Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@xxxxxxxxxxx>
> ---
> drivers/rtc/Kconfig | 11 +
> drivers/rtc/Makefile | 1 +
> drivers/rtc/rtc-s32g.c | 803 +++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 815 insertions(+)
> create mode 100644 drivers/rtc/rtc-s32g.c
>
> diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
> index e87c3d74565c..18fc3577f6cd 100644
> --- a/drivers/rtc/Kconfig
> +++ b/drivers/rtc/Kconfig
> @@ -2054,4 +2054,15 @@ config RTC_DRV_SSD202D
> This driver can also be built as a module, if so, the module
> will be called "rtc-ssd20xd".
>
> +config RTC_DRV_S32G
> + tristate "RTC driver for S32G2/S32G3 SoCs"
> + depends on ARCH_S32 || COMPILE_TEST
> + depends on COMMON_CLK
> + help
> + Say yes to enable RTC driver for platforms based on the
> + S32G2/S32G3 SoC family.
> +
> + This RTC module can be used as a wakeup source.
> + Please note that it is not battery-powered.
> +
> endif # RTC_CLASS
> diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
> index 8ee79cb18322..a63d010a753c 100644
> --- a/drivers/rtc/Makefile
> +++ b/drivers/rtc/Makefile
> @@ -158,6 +158,7 @@ obj-$(CONFIG_RTC_DRV_RX8025) += rtc-rx8025.o
> obj-$(CONFIG_RTC_DRV_RX8111) += rtc-rx8111.o
> obj-$(CONFIG_RTC_DRV_RX8581) += rtc-rx8581.o
> obj-$(CONFIG_RTC_DRV_RZN1) += rtc-rzn1.o
> +obj-$(CONFIG_RTC_DRV_S32G) += rtc-s32g.o
> obj-$(CONFIG_RTC_DRV_S35390A) += rtc-s35390a.o
> obj-$(CONFIG_RTC_DRV_S3C) += rtc-s3c.o
> obj-$(CONFIG_RTC_DRV_S5M) += rtc-s5m.o
> diff --git a/drivers/rtc/rtc-s32g.c b/drivers/rtc/rtc-s32g.c
> new file mode 100644
> index 000000000000..a05e23ece72a
> --- /dev/null
> +++ b/drivers/rtc/rtc-s32g.c
> @@ -0,0 +1,803 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Copyright 2024 NXP
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/clk-provider.h>
> +#include <linux/of_irq.h>
> +#include <linux/err.h>
> +#include <linux/platform_device.h>
> +#include <linux/rtc.h>
> +#include <linux/iopoll.h>
> +#include <linux/math64.h>
order by alphabetical
> +
> +#define RTCC_OFFSET 0x4ul
> +#define RTCS_OFFSET 0x8ul
> +#define RTCCNT_OFFSET 0xCul
> +#define APIVAL_OFFSET 0x10ul
> +#define RTCVAL_OFFSET 0x14ul
> +
> +/* RTCC fields */
> +#define RTCC_CNTEN BIT(31)
> +#define RTCC_RTCIE_SHIFT 30
> +#define RTCC_RTCIE BIT(RTCC_RTCIE_SHIFT)
> +#define RTCC_ROVREN BIT(28)
> +#define RTCC_APIEN BIT(15)
> +#define RTCC_APIIE BIT(14)
> +#define RTCC_CLKSEL_OFFSET 12
> +#define RTCC_CLKSEL_MASK GENMASK(13, 12)
> +#define RTCC_CLKSEL(n) (((n) << 12) & RTCC_CLKSEL_MASK)
> +#define RTCC_DIV512EN BIT(11)
> +#define RTCC_DIV32EN BIT(10)
> +
> +/* RTCS fields */
> +#define RTCS_RTCF BIT(29)
> +#define RTCS_INV_RTC BIT(18)
> +#define RTCS_APIF BIT(13)
> +#define RTCS_ROVRF BIT(10)
> +
> +#define ROLLOVER_VAL GENMASK(31, 0)
> +#define RTC_SYNCH_TIMEOUT (100 * USEC_PER_MSEC)
> +
> +#define RTC_CLK_MUX_SIZE 4
> +
> +/*
> + * S32G2 and S32G3 SoCs have RTC clock source 1 reserved and
> + * should not be used.
> + */
> +#define RTC_QUIRK_SRC1_RESERVED BIT(2)
> +
> +#define to_rtcpriv(_hw) container_of(_hw, struct rtc_priv, clk)
> +
> +enum {
> + RTC_CLK_SRC0 = 0,
needn't set to 0 here.
> + RTC_CLK_SRC1,
> + RTC_CLK_SRC2,
> + RTC_CLK_SRC3
> +};
> +
> +enum {
> + DIV1 = 1,
> + DIV32 = 32,
> + DIV512 = 512,
> + DIV512_32 = 16384
> +};
> +
> +struct rtc_time_base {
> + s64 sec;
> + u64 cycles;
> + u64 rollovers;
> + struct rtc_time tm;
> +};
> +
> +struct rtc_priv {
> + struct rtc_device *rdev;
> + u8 __iomem *rtc_base;
generally it void, not u8
> + struct clk_hw clk;
> + struct clk *ipg;
> + const struct rtc_soc_data *rtc_data;
> + struct rtc_time_base base;
> + u64 rtc_hz;
> + u64 rollovers;
> + int dt_irq_id;
> + int runtime_src_idx;
> + int suspend_src_idx;
> + u32 runtime_div;
> + u32 suspend_div;
> +};
> +
> +struct rtc_soc_data {
> + int default_runtime_src_idx;
> + int default_suspend_src_idx;
> + u32 default_runtime_div;
> + u32 default_suspend_div;
> + u32 quirks;
> +};
> +
> +static const struct rtc_soc_data rtc_s32g2_data = {
> + .default_runtime_src_idx = RTC_CLK_SRC2,
> + .default_suspend_src_idx = RTC_CLK_MUX_SIZE + RTC_CLK_SRC0,
> + .default_runtime_div = DIV512,
> + .default_suspend_div = DIV512,
> + .quirks = RTC_QUIRK_SRC1_RESERVED,
> +};
> +
> +static int is_src1_reserved(struct rtc_priv *priv)
> +{
> + return priv->rtc_data->quirks & RTC_QUIRK_SRC1_RESERVED;
> +}
> +
> +static u64 cycles_to_sec(u64 hz, u64 cycles)
> +{
> + return div_u64(cycles, hz);
> +}
> +
> +/*
> + * Convert a number of seconds to a value suitable for RTCVAL in our clock's
> + * current configuration.
> + * @rtcval: The value to go into RTCVAL[RTCVAL]
> + * Returns: 0 for success, -EINVAL if @seconds push the counter at least
> + * twice the rollover interval
> + */
If you want to use kernel doc, comment is /** at first line.
> +static int sec_to_rtcval(const struct rtc_priv *priv,
> + unsigned long seconds, u32 *rtcval)
> +{
> + u32 rtccnt, delta_cnt;
> + u32 target_cnt = 0;
> +
> + /* For now, support at most one rollover of the counter */
> + if (!seconds || seconds > cycles_to_sec(priv->rtc_hz, ROLLOVER_VAL))
> + return -EINVAL;
> +
> + /*
> + * RTCCNT is read-only; we must return a value relative to the
> + * current value of the counter (and hope we don't linger around
> + * too much before we get to enable the interrupt)
> + */
> + delta_cnt = seconds * priv->rtc_hz;
> + rtccnt = ioread32(priv->rtc_base + RTCCNT_OFFSET);
> +
> + if (~rtccnt < delta_cnt)
> + target_cnt = (delta_cnt - ~rtccnt);
> + else
> + target_cnt = rtccnt + delta_cnt;
> +
> + /*
> + * According to RTCVAL register description,
> + * its minimum value should be 4.
> + */
> + if (unlikely(target_cnt < 4))
> + target_cnt = 4;
> +
> + *rtcval = target_cnt;
> +
> + return 0;
> +}
> +
> +static irqreturn_t rtc_handler(int irq, void *dev)
> +{
> + struct rtc_priv *priv = platform_get_drvdata(dev);
> + u32 status;
> +
> + status = ioread32(priv->rtc_base + RTCS_OFFSET);
> + if (status & RTCS_ROVRF) {
> + if (priv->rollovers == ULONG_MAX)
> + priv->rollovers = 0;
> + else
> + priv->rollovers++;
> + }
> +
> + if (status & RTCS_RTCF) {
> + iowrite32(0x0, priv->rtc_base + RTCVAL_OFFSET);
> + rtc_update_irq(priv->rdev, 1, RTC_AF);
> + }
> +
> + if (status & RTCS_APIF)
> + rtc_update_irq(priv->rdev, 1, RTC_PF);
> +
> + iowrite32(status, priv->rtc_base + RTCS_OFFSET);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int get_time_left(struct device *dev, struct rtc_priv *priv,
> + u32 *sec)
> +{
> + u32 rtccnt = ioread32(priv->rtc_base + RTCCNT_OFFSET);
> + u32 rtcval = ioread32(priv->rtc_base + RTCVAL_OFFSET);
> +
> + if (rtcval < rtccnt) {
> + dev_err(dev, "RTC timer expired before entering suspend\n");
> + return -EIO;
> + }
> +
> + *sec = cycles_to_sec(priv->rtc_hz, rtcval - rtccnt);
> +
> + return 0;
> +}
> +
> +static s64 s32g_rtc_get_time_or_alrm(struct rtc_priv *priv,
> + u32 offset)
> +{
> + u64 cycles, base_cycles;
> + u32 counter;
> + s64 sec;
> +
> + counter = ioread32(priv->rtc_base + offset);
> + cycles = priv->rollovers * ROLLOVER_VAL + counter;
> + base_cycles = priv->base.cycles + priv->base.rollovers * ROLLOVER_VAL;
> +
> + if (cycles < base_cycles)
> + return -EINVAL;
> +
> + cycles -= base_cycles;
> + sec = priv->base.sec + cycles_to_sec(priv->rtc_hz, cycles);
> +
> + return sec;
> +}
> +
> +static int s32g_rtc_read_time(struct device *dev,
> + struct rtc_time *tm)
> +{
> + struct rtc_priv *priv = dev_get_drvdata(dev);
> + s64 sec;
> +
> + if (!tm)
> + return -EINVAL;
> +
> + sec = s32g_rtc_get_time_or_alrm(priv, RTCCNT_OFFSET);
> + if (sec < 0)
> + return -EINVAL;
> +
> + rtc_time64_to_tm(sec, tm);
> +
> + return 0;
> +}
> +
> +static int s32g_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
> +{
> + struct rtc_priv *priv = dev_get_drvdata(dev);
> + u32 rtcc, sec_left;
> + s64 sec;
> +
> + if (!alrm)
> + return -EINVAL;
> +
> + sec = s32g_rtc_get_time_or_alrm(priv, RTCVAL_OFFSET);
> + if (sec < 0)
> + return -EINVAL;
> +
> + rtc_time64_to_tm(sec, &alrm->time);
> +
> + rtcc = ioread32(priv->rtc_base + RTCC_OFFSET);
> + alrm->enabled = sec && (rtcc & RTCC_RTCIE);
> +
> + alrm->pending = 0;
> + if (alrm->enabled && !get_time_left(dev, priv, &sec_left))
> + alrm->pending = !!sec_left;
> +
> + return 0;
> +}
> +
> +static int s32g_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
> +{
> + struct rtc_priv *priv = dev_get_drvdata(dev);
> + u32 rtcc;
> +
> + if (!priv->dt_irq_id)
> + return -EIO;
> +
> + /*
> + * RTCIE cannot be deasserted because it will also disable the
> + * rollover interrupt.
> + */
> + rtcc = ioread32(priv->rtc_base + RTCC_OFFSET);
> + if (enabled)
> + rtcc |= RTCC_RTCIE;
> +
> + iowrite32(rtcc, priv->rtc_base + RTCC_OFFSET);
> +
> + return 0;
> +}
> +
> +static int s32g_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
> +{
> + struct rtc_priv *priv = dev_get_drvdata(dev);
> + struct rtc_time time_crt;
> + long long t_crt, t_alrm;
> + u32 rtcval, rtcs;
> + int ret = 0;
> +
> + iowrite32(0x0, priv->rtc_base + RTCVAL_OFFSET);
> +
> + t_alrm = rtc_tm_to_time64(&alrm->time);
> +
> + /*
> + * Assuming the alarm is being set relative to the same time
> + * returned by our s32g_rtc_read_time callback
> + */
> + ret = s32g_rtc_read_time(dev, &time_crt);
> + if (ret)
> + return ret;
> +
> + t_crt = rtc_tm_to_time64(&time_crt);
> + if (t_alrm <= t_crt) {
> + dev_warn(dev, "Alarm is set in the past\n");
> + return -EINVAL;
> + }
> +
> + ret = sec_to_rtcval(priv, t_alrm - t_crt, &rtcval);
> + if (ret) {
> + /*
> + * Rollover support enables RTC alarm
> + * for a maximum timespan of ~3 months.
> + */
> + dev_warn(dev, "Alarm is set too far in the future\n");
> + return ret;
> + }
> +
> + ret = read_poll_timeout(ioread32, rtcs, !(rtcs & RTCS_INV_RTC),
> + 0, RTC_SYNCH_TIMEOUT, false, priv->rtc_base + RTCS_OFFSET);
> + if (ret) {
> + dev_err(dev, "Synchronization failed\n");
> + return ret;
> + }
> +
> + iowrite32(rtcval, priv->rtc_base + RTCVAL_OFFSET);
> +
> + return 0;
> +}
> +
> +static int s32g_rtc_set_time(struct device *dev,
> + struct rtc_time *time)
> +{
> + struct rtc_priv *priv = dev_get_drvdata(dev);
> +
> + if (!time)
> + return -EINVAL;
> +
> + priv->base.rollovers = priv->rollovers;
> + priv->base.cycles = ioread32(priv->rtc_base + RTCCNT_OFFSET);
> + priv->base.sec = rtc_tm_to_time64(time);
> +
> + return 0;
> +}
> +
> +/*
> + * Disable the 32-bit free running counter.
> + * This allows Clock Source and Divisors selection
> + * to be performed without causing synchronization issues.
> + */
> +static void s32g_rtc_disable(struct rtc_priv *priv)
> +{
> + u32 rtcc = ioread32(priv->rtc_base + RTCC_OFFSET);
> +
> + rtcc &= ~RTCC_CNTEN;
> + iowrite32(rtcc, priv->rtc_base + RTCC_OFFSET);
> +}
> +
> +static void s32g_rtc_enable(struct rtc_priv *priv)
> +{
> + u32 rtcc = ioread32(priv->rtc_base + RTCC_OFFSET);
> +
> + rtcc |= RTCC_CNTEN;
> + iowrite32(rtcc, priv->rtc_base + RTCC_OFFSET);
> +}
> +
> +static int get_div_config(unsigned long req_rate,
> + unsigned long prate)
> +{
> + if (req_rate == prate)
> + return DIV1;
> + else if (req_rate == prate / (DIV512 * DIV32))
> + return DIV512_32;
> + else if (req_rate == prate / DIV512)
> + return DIV512;
> + else if (req_rate == prate / DIV32)
> + return DIV32;
> +
> + return 0;
> +}
> +
> +static void adjust_dividers(struct rtc_priv *priv,
> + u32 div_val, u32 *reg)
> +{
> + switch (div_val) {
> + case DIV512_32:
> + *reg |= RTCC_DIV512EN;
> + *reg |= RTCC_DIV32EN;
> + break;
> + case DIV512:
> + *reg |= RTCC_DIV512EN;
> + break;
> + case DIV32:
> + *reg |= RTCC_DIV32EN;
> + break;
> + default:
> + return;
> + }
> +
> + priv->rtc_hz /= div_val;
> +}
> +
> +static unsigned long get_prate_by_index(struct clk_hw *hw,
> + u8 index)
> +{
> + struct clk_hw *parent;
> +
> + parent = clk_hw_get_parent_by_index(hw, index);
> + if (!parent)
> + return -EINVAL;
> +
> + return clk_hw_get_rate(parent);
> +}
> +
> +static int rtc_clk_determine_rate(struct clk_hw *hw,
> + struct clk_rate_request *req)
> +{
> + struct rtc_priv *priv = to_rtcpriv(hw);
> + struct device *dev = priv->rdev->dev.parent;
> + int i, num_parents = clk_hw_get_num_parents(hw);
> + u32 config;
> +
> + for (i = 0; i < num_parents; i++) {
> + config = get_div_config(req->rate, get_prate_by_index(hw, i));
> + if (config) {
> + if (i < RTC_CLK_MUX_SIZE)
> + /* Runtime clk source divisors */
> + priv->runtime_div = config;
> + else
> + /* Suspend clk source divisors */
> + priv->suspend_div = config;
> +
> + return 0;
> + }
> + }
> +
> + dev_err(dev, "Failed to determine RTC clock rate\n");
> + return -EINVAL;
> +}
> +
> +static u8 rtc_clk_get_parent(struct clk_hw *hw)
> +{
> + struct rtc_priv *priv = to_rtcpriv(hw);
> +
> + return (ioread32(priv->rtc_base + RTCC_OFFSET) &
> + RTCC_CLKSEL_MASK) >> RTCC_CLKSEL_OFFSET;
> +}
> +
> +static int rtc_clk_src_switch(struct clk_hw *hw, u8 src)
> +{
> + struct rtc_priv *priv = to_rtcpriv(hw);
> + struct device *dev = priv->rdev->dev.parent;
> + u32 rtcc = 0;
> +
> + switch (src % RTC_CLK_MUX_SIZE) {
> + case RTC_CLK_SRC0:
> + rtcc |= RTCC_CLKSEL(RTC_CLK_SRC0);
> + break;
> + case RTC_CLK_SRC1:
> + if (is_src1_reserved(priv))
> + return -EOPNOTSUPP;
> + rtcc |= RTCC_CLKSEL(RTC_CLK_SRC1);
> + break;
> + case RTC_CLK_SRC2:
> + rtcc |= RTCC_CLKSEL(RTC_CLK_SRC2);
> + break;
> + case RTC_CLK_SRC3:
> + rtcc |= RTCC_CLKSEL(RTC_CLK_SRC3);
> + break;
> + default:
> + dev_err(dev, "Invalid clock mux parent: %d\n", src);
> + return -EINVAL;
> + }
> +
> + priv->rtc_hz = get_prate_by_index(hw, src);
> + if (!priv->rtc_hz) {
> + dev_err(dev, "Failed to get RTC frequency\n");
> + return -EINVAL;
> + }
> +
> + if (src < RTC_CLK_MUX_SIZE)
> + adjust_dividers(priv, priv->runtime_div, &rtcc);
> + else
> + adjust_dividers(priv, priv->suspend_div, &rtcc);
> +
> + rtcc |= RTCC_RTCIE | RTCC_ROVREN;
> + /*
> + * Make sure the CNTEN is 0 before we configure
> + * the clock source and dividers.
> + */
> + s32g_rtc_disable(priv);
> + iowrite32(rtcc, priv->rtc_base + RTCC_OFFSET);
> + s32g_rtc_enable(priv);
> +
> + return 0;
> +}
> +
> +static int rtc_clk_set_parent(struct clk_hw *hw, u8 index)
> +{
> + struct rtc_priv *priv = to_rtcpriv(hw);
> +
> + /*
> + * 0-3 IDs are Runtime clk sources
> + * 4-7 IDs are Suspend clk sources
> + */
> + if (index < RTC_CLK_MUX_SIZE) {
> + /* Runtime clk source */
> + priv->runtime_src_idx = index;
> + return 0;
> + } else if (index < RTC_CLK_MUX_SIZE * 2) {
> + /* Suspend clk source */
> + priv->suspend_src_idx = index;
> + return 0;
> + }
> +
> + return -EINVAL;
> +}
> +
> +static const struct rtc_class_ops rtc_ops = {
> + .read_time = s32g_rtc_read_time,
> + .set_time = s32g_rtc_set_time,
> + .read_alarm = s32g_rtc_read_alarm,
> + .set_alarm = s32g_rtc_set_alarm,
> + .alarm_irq_enable = s32g_rtc_alarm_irq_enable,
> +};
> +
> +static const struct clk_ops rtc_clk_ops = {
> + .determine_rate = rtc_clk_determine_rate,
> + .get_parent = rtc_clk_get_parent,
> + .set_parent = rtc_clk_set_parent,
> +};
> +
> +static int priv_dts_init(struct rtc_priv *priv, struct device *dev)
> +{
> + struct platform_device *pdev = to_platform_device(dev);
> +
> + priv->ipg = devm_clk_get(dev, "ipg");
> + if (IS_ERR(priv->ipg)) {
> + dev_err(dev, "Failed to get 'ipg' clock\n");
> + return PTR_ERR(priv->ipg);
> + }
> +
> + priv->dt_irq_id = platform_get_irq(pdev, 0);
> + if (priv->dt_irq_id < 0) {
> + dev_err(dev, "Error reading interrupt # from dts\n");
> + return priv->dt_irq_id;
> + }
> +
> + return 0;
> +}
> +
> +static int rtc_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct rtc_priv *priv;
> + static const char *parents[RTC_CLK_MUX_SIZE * 2] = {
> + "rtc_runtime_s0",
> + "rtc_runtime_s1",
> + "rtc_runtime_s2",
> + "rtc_runtime_s3",
> + "rtc_standby_s0",
> + "rtc_standby_s1",
> + "rtc_standby_s2",
> + "rtc_standby_s3"
> + };
> + struct clk_init_data clk_init = {
> + .name = "rtc_clk",
> + .ops = &rtc_clk_ops,
> + .flags = 0,
> + .parent_names = parents,
> + .num_parents = ARRAY_SIZE(parents),
> + };
> + int ret = 0;
> +
> + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + priv->rtc_data = of_device_get_match_data(dev);
> + if (!priv->rtc_data)
> + return -ENODEV;
> +
> + priv->rtc_base = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(priv->rtc_base))
> + return dev_err_probe(dev, PTR_ERR(priv->rtc_base),
> + "Failed to map registers\n");
> +
> + device_init_wakeup(dev, true);
> +
> + ret = priv_dts_init(priv, dev);
> + if (ret)
> + return ret;
> +
> + ret = clk_prepare_enable(priv->ipg);
use devm_clk_* function
> + if (ret) {
> + dev_err(dev, "Cannot enable 'ipg' clock, error: %d\n", ret);
> + return ret;
return dev_err_probe()
> + }
> +
> + priv->rdev = devm_rtc_allocate_device(dev);
> + if (IS_ERR(priv->rdev)) {
> + dev_err(dev, "Failed to allocate RTC device\n");
> + ret = PTR_ERR(priv->rdev);
> + goto disable_rtc;
after use devm_clk*
return dev_err_probe()
Frank
> + }
> +
> + if (!of_property_present(dev->of_node,
> + "assigned-clock-parents")) {
> + /*
> + * If parent clocks are not specified via DT
> + * use SoC specific defaults for clock source mux
> + * and divisors.
> + */
> + priv->runtime_src_idx = priv->rtc_data->default_runtime_src_idx;
> + priv->suspend_src_idx = priv->rtc_data->default_suspend_src_idx;
> + priv->runtime_div = priv->rtc_data->default_runtime_div;
> + priv->suspend_div = priv->rtc_data->default_suspend_div;
> + } else {
> + priv->runtime_src_idx = -EINVAL;
> + priv->suspend_src_idx = -EINVAL;
> + }
> +
> + priv->clk.init = &clk_init;
> + ret = devm_clk_hw_register(dev, &priv->clk);
> + if (ret) {
> + dev_err(dev, "Failed to register rtc_clk clk\n");
> + goto disable_ipg_clk;
> + }
> +
> + ret = of_clk_add_hw_provider(dev->of_node,
> + of_clk_hw_simple_get, priv->clk.clk);
> + if (ret) {
> + dev_err(dev, "Failed to add rtc_clk clk provider\n");
> + goto disable_ipg_clk;
> + }
why rtc is the clock provider?
> +
> + if (priv->runtime_src_idx < 0) {
> + ret = priv->runtime_src_idx;
> + dev_err(dev, "RTC runtime clock source is not specified\n");
> + goto disable_ipg_clk;
> + }
> +
> + ret = rtc_clk_src_switch(&priv->clk, priv->runtime_src_idx);
> + if (ret) {
> + dev_err(dev, "Failed clk source switch, err: %d\n", ret);
> + goto disable_ipg_clk;
> + }
> +
> + platform_set_drvdata(pdev, priv);
> + priv->rdev->ops = &rtc_ops;
> +
> + ret = devm_rtc_register_device(priv->rdev);
> + if (ret) {
> + dev_err(dev, "Failed to register RTC device\n");
> + goto disable_rtc;
> + }
> +
> + ret = devm_request_irq(dev, priv->dt_irq_id,
> + rtc_handler, 0, dev_name(dev), pdev);
> + if (ret) {
> + dev_err(dev, "Request interrupt %d failed, error: %d\n",
> + priv->dt_irq_id, ret);
> + goto disable_rtc;
> + }
> +
> + return 0;
> +
> +disable_ipg_clk:
> + clk_disable_unprepare(priv->ipg);
> +disable_rtc:
> + s32g_rtc_disable(priv);
> + return ret;
> +}
> +
> +static void rtc_remove(struct platform_device *pdev)
> +{
> + struct rtc_priv *priv = platform_get_drvdata(pdev);
> +
> + s32g_rtc_disable(priv);
> +}
> +
> +static void __maybe_unused enable_api_irq(struct device *dev, unsigned int enabled)
> +{
> + struct rtc_priv *priv = dev_get_drvdata(dev);
> + u32 api_irq = RTCC_APIEN | RTCC_APIIE;
> + u32 rtcc;
> +
> + rtcc = ioread32(priv->rtc_base + RTCC_OFFSET);
> + if (enabled)
> + rtcc |= api_irq;
> + else
> + rtcc &= ~api_irq;
> + iowrite32(rtcc, priv->rtc_base + RTCC_OFFSET);
> +}
> +
> +static int __maybe_unused rtc_suspend(struct device *dev)
> +{
> + struct rtc_priv *init_priv = dev_get_drvdata(dev);
> + struct rtc_priv priv;
> + long long base_sec;
> + int ret = 0;
> + u32 rtcval;
> + u32 sec;
> +
> + if (!device_may_wakeup(dev))
> + return 0;
> +
> + if (init_priv->suspend_src_idx < 0)
> + return 0;
> +
> + if (rtc_clk_get_parent(&init_priv->clk) == init_priv->suspend_src_idx)
> + return 0;
> +
> + /* Save last known timestamp before we switch clocks and reinit RTC */
> + ret = s32g_rtc_read_time(dev, &init_priv->base.tm);
> + if (ret)
> + return ret;
> +
> + /*
> + * Use a local copy of the RTC control block to
> + * avoid restoring it on resume path.
> + */
> + memcpy(&priv, init_priv, sizeof(priv));
> +
> + ret = get_time_left(dev, init_priv, &sec);
> + if (ret)
> + return ret;
> +
> + /* Adjust for the number of seconds we'll be asleep */
> + base_sec = rtc_tm_to_time64(&init_priv->base.tm);
> + base_sec += sec;
> + rtc_time64_to_tm(base_sec, &init_priv->base.tm);
> +
> + ret = rtc_clk_src_switch(&priv.clk, priv.suspend_src_idx);
> + if (ret) {
> + dev_err(dev, "Failed clk source switch, err: %d\n", ret);
> + return ret;
> + }
> +
> + ret = sec_to_rtcval(&priv, sec, &rtcval);
> + if (ret) {
> + dev_warn(dev, "Alarm is too far in the future\n");
> + return ret;
> + }
> +
> + s32g_rtc_alarm_irq_enable(dev, 0);
> + enable_api_irq(dev, 1);
> + iowrite32(rtcval, priv.rtc_base + APIVAL_OFFSET);
> + iowrite32(0, priv.rtc_base + RTCVAL_OFFSET);
> +
> + return ret;
> +}
> +
> +static int __maybe_unused rtc_resume(struct device *dev)
> +{
> + struct rtc_priv *priv = dev_get_drvdata(dev);
> + int ret;
> +
> + if (!device_may_wakeup(dev))
> + return 0;
> +
> + if (rtc_clk_get_parent(&priv->clk) == priv->runtime_src_idx)
> + return 0;
> +
> + /* Disable wake-up interrupts */
> + enable_api_irq(dev, 0);
> +
> + ret = rtc_clk_src_switch(&priv->clk, priv->runtime_src_idx);
> + if (ret) {
> + dev_err(dev, "Failed clk source switch, err: %d\n", ret);
> + return ret;
> + }
> +
> + /*
> + * Now RTCCNT has just been reset, and is out of sync with priv->base;
> + * reapply the saved time settings
> + */
> + return s32g_rtc_set_time(dev, &priv->base.tm);
> +}
> +
> +static const struct of_device_id rtc_dt_ids[] = {
> + { .compatible = "nxp,s32g2-rtc", .data = &rtc_s32g2_data},
> + { /* sentinel */ },
> +};
> +
> +static SIMPLE_DEV_PM_OPS(rtc_pm_ops,
> + rtc_suspend, rtc_resume);
> +
> +static struct platform_driver rtc_driver = {
> + .driver = {
> + .name = "s32g-rtc",
> + .pm = &rtc_pm_ops,
> + .of_match_table = rtc_dt_ids,
> + },
> + .probe = rtc_probe,
> + .remove = rtc_remove,
> +};
> +module_platform_driver(rtc_driver);
> +
> +MODULE_AUTHOR("NXP");
> +MODULE_DESCRIPTION("NXP RTC driver for S32G2/S32G3");
> +MODULE_LICENSE("GPL");
> --
> 2.45.2
>
