From: Axel Haslam <ahaslam@xxxxxxxxxxxx> Depending on board layout, the ad57xx may need control of reset, clear, and ldac pins by the host driver. Add optional bindings for these gpios. Reviewed-by: David Lechner <dlechner@xxxxxxxxxxxx> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> Signed-off-by: Axel Haslam <ahaslam@xxxxxxxxxxxx> --- .../devicetree/bindings/iio/dac/adi,ad5791.yaml | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml index c81285d84db7..fe664378c966 100644 --- a/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml @@ -31,6 +31,17 @@ properties: gain of two configuration. type: boolean + reset-gpios: + maxItems: 1 + + clear-gpios: + maxItems: 1 + + ldac-gpios: + description: + LDAC pin to be used as a hardware trigger to update the DAC channels. + maxItems: 1 + required: - compatible - reg @@ -44,6 +55,7 @@ unevaluatedProperties: false examples: - | + #include <dt-bindings/gpio/gpio.h> spi { #address-cells = <1>; #size-cells = <0>; @@ -53,6 +65,9 @@ examples: reg = <0>; vss-supply = <&dac_vss>; vdd-supply = <&dac_vdd>; + reset-gpios = <&gpio_bd 16 GPIO_ACTIVE_LOW>; + clear-gpios = <&gpio_bd 17 GPIO_ACTIVE_LOW>; + ldac-gpios = <&gpio_bd 18 GPIO_ACTIVE_HIGH>; }; }; ... -- 2.34.1