On Wed, 30 Oct 2024 16:33:56 -0500, David Lechner wrote: > Convert the AXI DMAC bindings from .txt to .yaml. > > Acked-by: Nuno Sa <nuno.sa@xxxxxxxxxx> > Reviewed-by: Rob Herring (Arm) <robh@xxxxxxxxxx> > Signed-off-by: David Lechner <dlechner@xxxxxxxxxxxx> > --- > > For the maintainer, Lars is the original author, but isn't really > active with ADI anymore, so I have added Nuno instead since he is the > most active ADI representative currently and is knowledgeable about this > hardware. > > As in v1, the rob-bot is likely to complain with the following: > > Documentation/devicetree/bindings/dma/adi,axi-dmac.yaml: properties:adi,channels:type: 'boolean' was expected > hint: A vendor boolean property can use "type: boolean" > from schema $id: http://devicetree.org/meta-schemas/vendor-props.yaml# > DTC [C] Documentation/devicetree/bindings/dma/adi,axi-dmac.example.dtb > > This is due to the fact that we have a vendor prefix on an object node. > We can't change that since it is an existing binding. Rob said he will > fix this in dtschema. > --- > .../devicetree/bindings/dma/adi,axi-dmac.txt | 61 --------- > .../devicetree/bindings/dma/adi,axi-dmac.yaml | 139 +++++++++++++++++++++ > 2 files changed, 139 insertions(+), 61 deletions(-) > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/dma/adi,axi-dmac.yaml: properties:adi,channels:type: 'boolean' was expected hint: A vendor boolean property can use "type: boolean" from schema $id: http://devicetree.org/meta-schemas/vendor-props.yaml# doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20241030-axi-dma-dt-yaml-v3-1-d3a9b506f96c@xxxxxxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.