On Wed, 01 Apr 2015, Chen-Yu Tsai wrote:
> From: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>
>
> Add support for the AXP22x PMIC devices to the existing AXP20x driver.
> This includes the AXP221 and AXP223, which are identical except for
> the external data bus. Only AXP221 is added for now. AXP223 will be
> added after it's Reduced Serial Bus (RSB) interface is supported.
>
> AXP22x defines a new set of registers, power supplies and regulators,
> but most of the API is similar to the AXP20x ones.
>
> A new irq chip definition is used, even though the available interrupts
> on AXP22x is a subset of those on AXP20x. This is done so the interrupt
> numbers match those on the datasheet.
>
> This patch only enables the interrupts, system power-off function, and PEK
> sub-device. The regulator driver must first support different variants
> before we enable it from the mfd driver.
>
> Signed-off-by: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx>
> [wens@xxxxxxxx: fix interrupts and move regulators to separate patch]
> Signed-off-by: Chen-Yu Tsai <wens@xxxxxxxx>
> Acked-by: Lee Jones <lee.jones@xxxxxxxxxx>
> ---
> drivers/mfd/axp20x.c | 98 ++++++++++++++++++++++++++++++++++++++++++++++
> include/linux/mfd/axp20x.h | 86 ++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 184 insertions(+)
Acked-by: Lee Jones <lee.jones@xxxxxxxxxx>
What's happening with this set by the way?
> diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
> index 1386826f713d..58573a5f73de 100644
> --- a/drivers/mfd/axp20x.c
> +++ b/drivers/mfd/axp20x.c
> @@ -32,6 +32,7 @@
> static const char * const axp20x_model_names[] = {
> "AXP202",
> "AXP209",
> + "AXP221",
> "AXP288",
> };
>
> @@ -54,6 +55,25 @@ static const struct regmap_access_table axp20x_volatile_table = {
> .n_yes_ranges = ARRAY_SIZE(axp20x_volatile_ranges),
> };
>
> +static const struct regmap_range axp22x_writeable_ranges[] = {
> + regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ5_STATE),
> + regmap_reg_range(AXP20X_DCDC_MODE, AXP22X_BATLOW_THRES1),
> +};
> +
> +static const struct regmap_range axp22x_volatile_ranges[] = {
> + regmap_reg_range(AXP20X_IRQ1_EN, AXP20X_IRQ5_STATE),
> +};
> +
> +static const struct regmap_access_table axp22x_writeable_table = {
> + .yes_ranges = axp22x_writeable_ranges,
> + .n_yes_ranges = ARRAY_SIZE(axp22x_writeable_ranges),
> +};
> +
> +static const struct regmap_access_table axp22x_volatile_table = {
> + .yes_ranges = axp22x_volatile_ranges,
> + .n_yes_ranges = ARRAY_SIZE(axp22x_volatile_ranges),
> +};
> +
> static const struct regmap_range axp288_writeable_ranges[] = {
> regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ6_STATE),
> regmap_reg_range(AXP20X_DCDC_MODE, AXP288_FG_TUNE5),
> @@ -87,6 +107,20 @@ static struct resource axp20x_pek_resources[] = {
> },
> };
>
> +static struct resource axp22x_pek_resources[] = {
> + {
> + .name = "PEK_DBR",
> + .start = AXP22X_IRQ_PEK_RIS_EDGE,
> + .end = AXP22X_IRQ_PEK_RIS_EDGE,
> + .flags = IORESOURCE_IRQ,
> + }, {
> + .name = "PEK_DBF",
> + .start = AXP22X_IRQ_PEK_FAL_EDGE,
> + .end = AXP22X_IRQ_PEK_FAL_EDGE,
> + .flags = IORESOURCE_IRQ,
> + },
> +};
> +
> static struct resource axp288_fuel_gauge_resources[] = {
> {
> .start = AXP288_IRQ_QWBTU,
> @@ -129,6 +163,15 @@ static const struct regmap_config axp20x_regmap_config = {
> .cache_type = REGCACHE_RBTREE,
> };
>
> +static const struct regmap_config axp22x_regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .wr_table = &axp22x_writeable_table,
> + .volatile_table = &axp22x_volatile_table,
> + .max_register = AXP22X_BATLOW_THRES1,
> + .cache_type = REGCACHE_RBTREE,
> +};
> +
> static const struct regmap_config axp288_regmap_config = {
> .reg_bits = 8,
> .val_bits = 8,
> @@ -181,6 +224,34 @@ static const struct regmap_irq axp20x_regmap_irqs[] = {
> INIT_REGMAP_IRQ(AXP20X, GPIO0_INPUT, 4, 0),
> };
>
> +static const struct regmap_irq axp22x_regmap_irqs[] = {
> + INIT_REGMAP_IRQ(AXP22X, ACIN_OVER_V, 0, 7),
> + INIT_REGMAP_IRQ(AXP22X, ACIN_PLUGIN, 0, 6),
> + INIT_REGMAP_IRQ(AXP22X, ACIN_REMOVAL, 0, 5),
> + INIT_REGMAP_IRQ(AXP22X, VBUS_OVER_V, 0, 4),
> + INIT_REGMAP_IRQ(AXP22X, VBUS_PLUGIN, 0, 3),
> + INIT_REGMAP_IRQ(AXP22X, VBUS_REMOVAL, 0, 2),
> + INIT_REGMAP_IRQ(AXP22X, VBUS_V_LOW, 0, 1),
> + INIT_REGMAP_IRQ(AXP22X, BATT_PLUGIN, 1, 7),
> + INIT_REGMAP_IRQ(AXP22X, BATT_REMOVAL, 1, 6),
> + INIT_REGMAP_IRQ(AXP22X, BATT_ENT_ACT_MODE, 1, 5),
> + INIT_REGMAP_IRQ(AXP22X, BATT_EXIT_ACT_MODE, 1, 4),
> + INIT_REGMAP_IRQ(AXP22X, CHARG, 1, 3),
> + INIT_REGMAP_IRQ(AXP22X, CHARG_DONE, 1, 2),
> + INIT_REGMAP_IRQ(AXP22X, BATT_TEMP_HIGH, 1, 1),
> + INIT_REGMAP_IRQ(AXP22X, BATT_TEMP_LOW, 1, 0),
> + INIT_REGMAP_IRQ(AXP22X, DIE_TEMP_HIGH, 2, 7),
> + INIT_REGMAP_IRQ(AXP22X, PEK_SHORT, 2, 1),
> + INIT_REGMAP_IRQ(AXP22X, PEK_LONG, 2, 0),
> + INIT_REGMAP_IRQ(AXP22X, LOW_PWR_LVL1, 3, 1),
> + INIT_REGMAP_IRQ(AXP22X, LOW_PWR_LVL2, 3, 0),
> + INIT_REGMAP_IRQ(AXP22X, TIMER, 4, 7),
> + INIT_REGMAP_IRQ(AXP22X, PEK_RIS_EDGE, 4, 6),
> + INIT_REGMAP_IRQ(AXP22X, PEK_FAL_EDGE, 4, 5),
> + INIT_REGMAP_IRQ(AXP22X, GPIO1_INPUT, 4, 1),
> + INIT_REGMAP_IRQ(AXP22X, GPIO0_INPUT, 4, 0),
> +};
> +
> /* some IRQs are compatible with axp20x models */
> static const struct regmap_irq axp288_regmap_irqs[] = {
> INIT_REGMAP_IRQ(AXP288, VBUS_FALL, 0, 2),
> @@ -224,6 +295,7 @@ static const struct regmap_irq axp288_regmap_irqs[] = {
> static const struct of_device_id axp20x_of_match[] = {
> { .compatible = "x-powers,axp202", .data = (void *) AXP202_ID },
> { .compatible = "x-powers,axp209", .data = (void *) AXP209_ID },
> + { .compatible = "x-powers,axp221", .data = (void *) AXP221_ID },
> { },
> };
> MODULE_DEVICE_TABLE(of, axp20x_of_match);
> @@ -258,6 +330,18 @@ static const struct regmap_irq_chip axp20x_regmap_irq_chip = {
>
> };
>
> +static const struct regmap_irq_chip axp22x_regmap_irq_chip = {
> + .name = "axp22x_irq_chip",
> + .status_base = AXP20X_IRQ1_STATE,
> + .ack_base = AXP20X_IRQ1_STATE,
> + .mask_base = AXP20X_IRQ1_EN,
> + .mask_invert = true,
> + .init_ack_masked = true,
> + .irqs = axp22x_regmap_irqs,
> + .num_irqs = ARRAY_SIZE(axp22x_regmap_irqs),
> + .num_regs = 5,
> +};
> +
> static const struct regmap_irq_chip axp288_regmap_irq_chip = {
> .name = "axp288_irq_chip",
> .status_base = AXP20X_IRQ1_STATE,
> @@ -281,6 +365,14 @@ static struct mfd_cell axp20x_cells[] = {
> },
> };
>
> +static struct mfd_cell axp22x_cells[] = {
> + {
> + .name = "axp20x-pek",
> + .num_resources = ARRAY_SIZE(axp22x_pek_resources),
> + .resources = axp22x_pek_resources,
> + },
> +};
> +
> static struct resource axp288_adc_resources[] = {
> {
> .name = "GPADC",
> @@ -398,6 +490,12 @@ static int axp20x_match_device(struct axp20x_dev *axp20x, struct device *dev)
> axp20x->regmap_cfg = &axp20x_regmap_config;
> axp20x->regmap_irq_chip = &axp20x_regmap_irq_chip;
> break;
> + case AXP221_ID:
> + axp20x->nr_cells = ARRAY_SIZE(axp22x_cells);
> + axp20x->cells = axp22x_cells;
> + axp20x->regmap_cfg = &axp22x_regmap_config;
> + axp20x->regmap_irq_chip = &axp22x_regmap_irq_chip;
> + break;
> case AXP288_ID:
> axp20x->cells = axp288_cells;
> axp20x->nr_cells = ARRAY_SIZE(axp288_cells);
> diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h
> index dfabd6db7ddf..95568eb798c3 100644
> --- a/include/linux/mfd/axp20x.h
> +++ b/include/linux/mfd/axp20x.h
> @@ -14,6 +14,7 @@
> enum {
> AXP202_ID = 0,
> AXP209_ID,
> + AXP221_ID,
> AXP288_ID,
> NR_AXP20X_VARIANTS,
> };
> @@ -45,6 +46,28 @@ enum {
> #define AXP20X_V_LTF_DISCHRG 0x3c
> #define AXP20X_V_HTF_DISCHRG 0x3d
>
> +#define AXP22X_PWR_OUT_CTRL1 0x10
> +#define AXP22X_PWR_OUT_CTRL2 0x12
> +#define AXP22X_PWR_OUT_CTRL3 0x13
> +#define AXP22X_DLDO1_V_OUT 0x15
> +#define AXP22X_DLDO2_V_OUT 0x16
> +#define AXP22X_DLDO3_V_OUT 0x17
> +#define AXP22X_DLDO4_V_OUT 0x18
> +#define AXP22X_ELDO1_V_OUT 0x19
> +#define AXP22X_ELDO2_V_OUT 0x1a
> +#define AXP22X_ELDO3_V_OUT 0x1b
> +#define AXP22X_DC5LDO_V_OUT 0x1c
> +#define AXP22X_DCDC1_V_OUT 0x21
> +#define AXP22X_DCDC2_V_OUT 0x22
> +#define AXP22X_DCDC3_V_OUT 0x23
> +#define AXP22X_DCDC4_V_OUT 0x24
> +#define AXP22X_DCDC5_V_OUT 0x25
> +#define AXP22X_DCDC23_V_RAMP_CTRL 0x27
> +#define AXP22X_ALDO1_V_OUT 0x28
> +#define AXP22X_ALDO2_V_OUT 0x29
> +#define AXP22X_ALDO3_V_OUT 0x2a
> +#define AXP22X_CHRG_CTRL3 0x35
> +
> /* Interrupt */
> #define AXP20X_IRQ1_EN 0x40
> #define AXP20X_IRQ2_EN 0x41
> @@ -100,6 +123,9 @@ enum {
> #define AXP20X_VBUS_MON 0x8b
> #define AXP20X_OVER_TMP 0x8f
>
> +#define AXP22X_PWREN_CTRL1 0x8c
> +#define AXP22X_PWREN_CTRL2 0x8d
> +
> /* GPIO */
> #define AXP20X_GPIO0_CTRL 0x90
> #define AXP20X_LDO5_V_OUT 0x91
> @@ -108,6 +134,11 @@ enum {
> #define AXP20X_GPIO20_SS 0x94
> #define AXP20X_GPIO3_CTRL 0x95
>
> +#define AXP22X_LDO_IO0_V_OUT 0x91
> +#define AXP22X_LDO_IO1_V_OUT 0x93
> +#define AXP22X_GPIO_STATE 0x94
> +#define AXP22X_GPIO_PULL_DOWN 0x95
> +
> /* Battery */
> #define AXP20X_CHRG_CC_31_24 0xb0
> #define AXP20X_CHRG_CC_23_16 0xb1
> @@ -120,6 +151,9 @@ enum {
> #define AXP20X_CC_CTRL 0xb8
> #define AXP20X_FG_RES 0xb9
>
> +/* AXP22X specific registers */
> +#define AXP22X_BATLOW_THRES1 0xe6
> +
> /* AXP288 specific registers */
> #define AXP288_PMIC_ADC_H 0x56
> #define AXP288_PMIC_ADC_L 0x57
> @@ -158,6 +192,30 @@ enum {
> AXP20X_REG_ID_MAX,
> };
>
> +enum {
> + AXP22X_DCDC1 = 0,
> + AXP22X_DCDC2,
> + AXP22X_DCDC3,
> + AXP22X_DCDC4,
> + AXP22X_DCDC5,
> + AXP22X_DC1SW,
> + AXP22X_DC5LDO,
> + AXP22X_ALDO1,
> + AXP22X_ALDO2,
> + AXP22X_ALDO3,
> + AXP22X_ELDO1,
> + AXP22X_ELDO2,
> + AXP22X_ELDO3,
> + AXP22X_DLDO1,
> + AXP22X_DLDO2,
> + AXP22X_DLDO3,
> + AXP22X_DLDO4,
> + AXP22X_RTC_LDO,
> + AXP22X_LDO_IO0,
> + AXP22X_LDO_IO1,
> + AXP22X_REG_ID_MAX,
> +};
> +
> /* IRQs */
> enum {
> AXP20X_IRQ_ACIN_OVER_V = 1,
> @@ -199,6 +257,34 @@ enum {
> AXP20X_IRQ_GPIO0_INPUT,
> };
>
> +enum axp22x_irqs {
> + AXP22X_IRQ_ACIN_OVER_V = 1,
> + AXP22X_IRQ_ACIN_PLUGIN,
> + AXP22X_IRQ_ACIN_REMOVAL,
> + AXP22X_IRQ_VBUS_OVER_V,
> + AXP22X_IRQ_VBUS_PLUGIN,
> + AXP22X_IRQ_VBUS_REMOVAL,
> + AXP22X_IRQ_VBUS_V_LOW,
> + AXP22X_IRQ_BATT_PLUGIN,
> + AXP22X_IRQ_BATT_REMOVAL,
> + AXP22X_IRQ_BATT_ENT_ACT_MODE,
> + AXP22X_IRQ_BATT_EXIT_ACT_MODE,
> + AXP22X_IRQ_CHARG,
> + AXP22X_IRQ_CHARG_DONE,
> + AXP22X_IRQ_BATT_TEMP_HIGH,
> + AXP22X_IRQ_BATT_TEMP_LOW,
> + AXP22X_IRQ_DIE_TEMP_HIGH,
> + AXP22X_IRQ_PEK_SHORT,
> + AXP22X_IRQ_PEK_LONG,
> + AXP22X_IRQ_LOW_PWR_LVL1,
> + AXP22X_IRQ_LOW_PWR_LVL2,
> + AXP22X_IRQ_TIMER,
> + AXP22X_IRQ_PEK_RIS_EDGE,
> + AXP22X_IRQ_PEK_FAL_EDGE,
> + AXP22X_IRQ_GPIO1_INPUT,
> + AXP22X_IRQ_GPIO0_INPUT,
> +};
> +
> enum axp288_irqs {
> AXP288_IRQ_VBUS_FALL = 2,
> AXP288_IRQ_VBUS_RISE,
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
