When the fixed regulators for the LCD panel and DP bridge were added,
their supplies were not modeled in. These, except for the 1.0V supply,
are just load switches, and need and have a supply.
Add the supplies for each of the fixed regulators.
Fixes: cabc71b08eb5 ("arm64: dts: mt8183: Add kukui-jacuzzi-damu board")
Signed-off-by: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
---
arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
index f540dcac74ea..80888bd4ad82 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
@@ -20,6 +20,7 @@ pp1000_mipibrdg: pp1000-mipibrdg {
regulator-boot-on;
gpio = <&pio 54 GPIO_ACTIVE_HIGH>;
+ vin-supply = <&pp1800_alw>;
};
pp1800_mipibrdg: pp1800-mipibrdg {
@@ -32,6 +33,7 @@ pp1800_mipibrdg: pp1800-mipibrdg {
regulator-boot-on;
gpio = <&pio 36 GPIO_ACTIVE_HIGH>;
+ vin-supply = <&pp1800_alw>;
};
pp3300_panel: pp3300-panel {
@@ -44,6 +46,7 @@ pp3300_panel: pp3300-panel {
regulator-boot-on;
gpio = <&pio 35 GPIO_ACTIVE_HIGH>;
+ vin-supply = <&pp3300_alw>;
};
pp3300_mipibrdg: pp3300-mipibrdg {
@@ -56,6 +59,7 @@ pp3300_mipibrdg: pp3300-mipibrdg {
regulator-boot-on;
gpio = <&pio 37 GPIO_ACTIVE_HIGH>;
+ vin-supply = <&pp3300_alw>;
};
volume_buttons: volume-buttons {
--
2.47.0.163.g1226f6d8fa-goog
