On Tue, Oct 29, 2024 at 08:24:43AM +0100, Francesco Dolcini wrote: > From: Parth Pancholi <parth.pancholi@xxxxxxxxxxx> > > Add device tree bindings for TI's TUSB73x0 PCIe-to-USB 3.0 xHCI > host controller. The controller supports software configuration > through PCIe registers, such as controlling the PWRONx polarity > via the USB control register (E0h). > > Datasheet: https://www.ti.com/lit/ds/symlink/tusb7320.pdf > Signed-off-by: Parth Pancholi <parth.pancholi@xxxxxxxxxxx> > Signed-off-by: Francesco Dolcini <francesco.dolcini@xxxxxxxxxxx> > --- > v5: > - s/ti,tusb7320-pwron-active-high/ti,pwron-active-high/ > v4: > - add $ref: usb-xhci.yaml > - description: wrap to 80 columns, add that the two variants use the > same device ID > - revise the example, based on comment from Rob and taking > marvell,prestera.yaml as an example (this binding was reviewed and > amended by Rob in the past). > v3: use lowercase hex in compatible > v2: rename property to ti,tusb7320-pwron-active-high and change type to flag Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> Best regards, Krzysztof
