Remove the binding for the generic Mercury+ AA1 on PE1 carrier board. The removed Mercury+ AA1 on PE1 carrier board is just a particular setup case, which is actually replaced by the set of generic Mercury+ AA1 combinations patch. In other words a combination of a Mercury+ AA1 on a PE1 base board, with boot mode SD card is already covered by the generic AA1 combinations. There is no further reason to keep this particular case now in a redundantly. Thus the redundant DT setup is removed. Signed-off-by: Lothar Rubusch <l.rubusch@xxxxxxxxx> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> --- Documentation/devicetree/bindings/arm/altera.yaml | 1 - 1 file changed, 1 deletion(-) diff --git a/Documentation/devicetree/bindings/arm/altera.yaml b/Documentation/devicetree/bindings/arm/altera.yaml index 51f10ff8e..1561f0164 100644 --- a/Documentation/devicetree/bindings/arm/altera.yaml +++ b/Documentation/devicetree/bindings/arm/altera.yaml @@ -31,7 +31,6 @@ properties: - description: Mercury+ AA1 boards items: - enum: - - enclustra,mercury-pe1 - enclustra,mercury-aa1-pe1 - enclustra,mercury-aa1-pe3 - enclustra,mercury-aa1-st1 -- 2.25.1