On 10/27/2024 6:54 AM, Dmitry Baryshkov wrote:
Add DT file for the Qualcomm SAR2130P platform.
Co-developed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sar2130p.dtsi | 3091 ++++++++++++++++++++++++++++++++
1 file changed, 3091 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sar2130p.dtsi b/arch/arm64/boot/dts/qcom/sar2130p.dtsi
new file mode 100644
index 0000000000000000000000000000000000000000..a8edbb9e6591265644476623aec36be9147ed7a0
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sar2130p.dtsi
[...]
+
+ usb_1: usb@a6f8800 {
+ compatible = "qcom,sar2130p-dwc3", "qcom,dwc3";
+ reg = <0x0 0x0a6f8800 0x0 0x400>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+ <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+ <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+ <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+ <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+ <&tcsr TCSR_USB3_CLKREF_EN>;
+ clock-names = "cfg_noc",
+ "core",
+ "iface",
+ "sleep",
+ "mock_utmi",
+ "xo";
+
+ assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+ assigned-clock-rates = <19200000>, <200000000>;
+
+ interrupts-extended = <&intc GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+ //<&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pwr_event",
+ //"hs_phy_irq",
+ "dp_hs_phy_irq",
+ "dm_hs_phy_irq",
+ "ss_phy_irq";
+
I checked the hw specifics and hs_phy_irq is 349.
+ power-domains = <&gcc USB30_PRIM_GDSC>;
+ required-opps = <&rpmhpd_opp_nom>;
+
+ resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+ interconnects = <&system_noc MASTER_USB3_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_USB3_0 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "usb-ddr", "apps-usb";
+
+ status = "disabled";
+
+ usb_1_dwc3: usb@a600000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0x0a600000 0x0 0xcd00>;
+ interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>;
+ iommus = <&apps_smmu 0x20 0x0>;
+ phys = <&usb_1_hsphy>,
+ <&usb_dp_qmpphy QMP_USB43DP_USB3_PHY>;
+ phy-names = "usb2-phy", "usb3-phy";
+
+ snps,has-lpm-erratum;
+ snps,hird-threshold = /bits/ 8 <0x0>;
+ snps,is-utmi-l1-suspend;
+ snps,dis-u1-entry-quirk;
+ snps,dis-u2-entry-quirk;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_u3_susphy_quirk;
+ snps,parkmode-disable-ss-quirk;
+
+ tx-fifo-resize;
+ dma-coherent;
+ usb-role-switch;
+
Ideally, neither the QAR2130P or customer designs support ID detection
today. Not that it can't but no one is doing it. Everyone uses it in
peripheral mode. Also on QAR2130 (which I assume is same as QXR platform
on downstream, the role switch is provided by BQ256xx battery charger
driver (apologies if I used the name of the driver wrong), via extcon.
Since (AFAIK) this support is not there on upstream today and no one
uses host mode, you can choose to drop role switch here.
Regards,
Krishna,
