Hi Krzysztof , Himanshu
>>> +
>>> + i2c {
>>
>>Keep one complete example for i2c and one for spi. This was not in
>>previous patch and change log does not explain why you need three
>>examples.
>
>Okay, I will drop one example of I2C
In ex1: use when you only need basic GPIO and interrupt capabilities
without additional pin control and in ex2: use when you need pull-up
resistors on specific GPIO pins or a reset line.
Original bindings state that this node can be implemented in two
different ways, so we should maintain both examples for reference.
But it's up to you, I trust your expertise on this, Krzysztof
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> +
>>> + mcp23017: gpio@21 {
>>
>>Drop unused label
>
>May I know how its unused, AFAIK, Since it's an I/O expanded, it’s referenced elsewhere, so keeping it is necessary for >functionality.
I agree with Himanshu.
It's definitely used for reset GPIOs, LED pins, or something similar.
Best Regards,
Tarang
