The first argument of lpcg should indices, instead of index. Fix it by
use predefined macro.
Fixes: 9f7053f67c8a ("arm64: dts: imx8-ss-hsio: Add PCIe and SATA support")
Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
---
Shanw:
Sorry, I miss check this again. If you like, you can squash to previous
patch
---
.../arm64/boot/dts/freescale/imx8qm-ss-hsio.dtsi | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-hsio.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-hsio.dtsi
index 59b6a670462c7..b1d0189a17258 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-ss-hsio.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-hsio.dtsi
@@ -24,9 +24,9 @@ pciea: pcie@5f000000 {
interrupt-names = "msi";
#address-cells = <3>;
#size-cells = <2>;
- clocks = <&pciea_lpcg 2>,
- <&pciea_lpcg 0>,
- <&pciea_lpcg 1>;
+ clocks = <&pciea_lpcg IMX_LPCG_CLK_6>,
+ <&pciea_lpcg IMX_LPCG_CLK_4>,
+ <&pciea_lpcg IMX_LPCG_CLK_5>;
clock-names = "dbi", "mstr", "slv";
bus-range = <0x00 0xff>;
device_type = "pci";
@@ -54,9 +54,9 @@ pcieb: pcie@5f010000 {
interrupt-names = "msi";
#address-cells = <3>;
#size-cells = <2>;
- clocks = <&pcieb_lpcg 2>,
- <&pcieb_lpcg 0>,
- <&pcieb_lpcg 1>;
+ clocks = <&pcieb_lpcg IMX_LPCG_CLK_6>,
+ <&pcieb_lpcg IMX_LPCG_CLK_4>,
+ <&pcieb_lpcg IMX_LPCG_CLK_5>;
clock-names = "dbi", "mstr", "slv";
bus-range = <0x00 0xff>;
device_type = "pci";
@@ -76,8 +76,8 @@ sata: sata@5f020000 {
compatible = "fsl,imx8qm-ahci";
reg = <0x5f020000 0x10000>;
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&sata_lpcg 0>,
- <&sata_crr4_lpcg 0>;
+ clocks = <&sata_lpcg IMX_LPCG_CLK_4>,
+ <&sata_crr4_lpcg IMX_LPCG_CLK_4>;
clock-names = "sata", "sata_ref";
phy-names = "sata-phy", "cali-phy0", "cali-phy1";
power-domains = <&pd IMX_SC_R_SATA_0>;
--
2.34.1
