From: Lori Hikichi <lhikichi@xxxxxxxxxxxx>
Add device tree binding documentation for the Cygnus SOC audio block
Reviewed-by: Jonathan Richardson <jonathar@xxxxxxxxxxxx>
Reviewed-by: Ray Jui <rjui@xxxxxxxxxxxx>
Signed-off-by: Scott Branden <sbranden@xxxxxxxxxxxx>
Signed-off-by: Lori Hikichi <lhikichi@xxxxxxxxxxxx>
---
.../bindings/sound/brcm,cygnus-audio.txt | 68 ++++++++++++++++++++++
1 file changed, 68 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt
diff --git a/Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt b/Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt
new file mode 100644
index 0000000..5358cc3
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/brcm,cygnus-audio.txt
@@ -0,0 +1,68 @@
+BROADCOM Cygnus Audio I2S/TDM/SPDIF controller
+
+Required properties:
+ - compatible : "brcm,cygnus-audio"
+ - #address-cells: 32bit valued, 1 cell. <1>
+ - #size-cells: 32bit valued, 1 cell. <1>
+ - reg : Should contain audio registers location and length
+ - interrupts: audio DMA interrupt number
+
+SSP Subnode properties:
+- dai-name: The name of the DAI registered with ASOC
+- ssp-port-id: The ssp port interface to use
+ Valid value are 0, 1, 2, or 3 (for spdif)
+- mode: Controls if this port should be configured as I2S or TDM mode.
+ Valid values are: "tdm" or "i2s"
+- tdm-bits-per-frame: only if mode is "tdm" then this property must set.
+ Valid values are (128/256/512)
+- port-status: Controls if port is enabled or not
+ Valid values "enabled" or "disabled"
+- channel-group: Control grouping of serial port
+ Valid values are "2_0", "3_1", or "5_1"
+
+Example:
+ cygnus_audio: audio@0x180ae000 {
+ compatible = "brcm,cygnus-audio";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x180ae000 0x1000>;
+
+ interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+
+ ssp0: ssp_port@0 {
+ dai-name = "cygnus-ssp0";
+ ssp-port-id = <0>;
+
+ mode = "i2s"; /* "i2s" or "tdm" */
+ channel-group = "2_0"; /* Use 2_0, 3_1, 5_1 */
+ port-status = "enabled";
+ };
+
+ ssp1: ssp_port@1 {
+ dai-name = "cygnus-ssp1";
+ ssp-port-id = <1>;
+
+ mode = "i2s"; /* "i2s" or "tdm" */
+ channel-group = "2_0"; /* Use 2_0, 3_1, 5_1 */
+ port-status = "disabled";
+ };
+
+ ssp2: ssp_port@2 {
+ dai-name = "cygnus-ssp2";
+ ssp-port-id = <2>;
+
+ mode = "tdm"; /* "i2s" or "tdm" */
+ tdm-bits-per-frame = <256>;
+ channel-group = "2_0"; /* Use 2_0, 3_1, 5_1 */
+ port-status = "disabled";
+ };
+
+ spdif: spdif_port@3 {
+ dai-name = "cygnus-spdif";
+ ssp-port-id = <3>;
+
+ mode = "i2s"; /* "i2s" or "tdm" */
+ channel-group = "2_0"; /* Use 2_0, 3_1, 5_1 */
+ port-status = "disabled";
+ };
+ };
--
2.3.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
