NVEC driver was reimplemented to use tegra i2c. Use common i2c bindings for NVEC node. Signed-off-by: Andrey Danin <danindrey@xxxxxxx> --- Changes for v2: - swap reg and request-gpios properties - use nvec-slave instead of nvec to keep ABI compatibility - place doc in separate patch --- arch/arm/boot/dts/tegra20-paz00.dts | 22 +++++++++------------- 1 file changed, 9 insertions(+), 13 deletions(-) diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts index ed7e100..cd5e6ef 100644 --- a/arch/arm/boot/dts/tegra20-paz00.dts +++ b/arch/arm/boot/dts/tegra20-paz00.dts @@ -288,20 +288,16 @@ clock-frequency = <100000>; }; - nvec@7000c500 { - compatible = "nvidia,nvec"; - reg = <0x7000c500 0x100>; - interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; + i2c@7000c500 { + status = "okay"; clock-frequency = <80000>; - request-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>; - slave-addr = <138>; - clocks = <&tegra_car TEGRA20_CLK_I2C3>, - <&tegra_car TEGRA20_CLK_PLL_P_OUT3>; - clock-names = "div-clk", "fast-clk"; - resets = <&tegra_car 67>; - reset-names = "i2c"; + + nvec: nvec@45 { + compatible = "nvidia,nvec-slave"; + reg = <0x45>; + request-gpios = <&gpio TEGRA_GPIO(V, 2) + GPIO_ACTIVE_HIGH>; + }; }; i2c@7000d000 { -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html