Re: [PATCH v2] arm64: dts: mediatek: mt8195: Fix dtbs_check error for tphy

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 10/9/24 17:21, Macpaul Lin wrote:


On 10/8/24 17:09, AngeloGioacchino Del Regno wrote:
Il 08/10/24 09:15, Macpaul Lin ha scritto:
The u3phy1 node in mt8195.dtsi was triggering a dtbs_check error.
The error message was:
   t-phy@11e30000: 'power-domains' does not match any of the regexes:
     '^(usb|pcie|sata)-phy@[0-9a-f]+$', 'pinctrl-[0-9]+'
Fix this issue by dropping 'power-domains' of u3phy1 node.

This is because MediaTek tphy dose not need to add mtcmos.  It is not
necessary to add 'power-domains'. If the power of the tphy is turned off,
it will affect other functions. From the current USB hardware design
perspective, even if mtcmos is added to the phy, it is always on.

Fixes: 37f2582883be ("arm64: dts: Add mediatek SoC mt8195 and evaluation board")
Signed-off-by: Macpaul Lin <macpaul.lin@xxxxxxxxxxxx>

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>

Sorry for bothering, it seems MediaTek internal still have some
discussion about according to Conor's suggestion:

[1] https://lore.kernel.org/lkml/20241008-disorder-slacking-d8196ceb68f7@spud/T/#mccf978d76f52cc26970f3f3be6120055e4698fe6

Please don't to pick this patch until if MediaTek could have some
conclusions.

Update: This patch could be dropped since the correct fix in
TPHY's DT Schema has been accepted.

[2] https://lore.kernel.org/all/172917936283.288841.9548294790735623997.b4-ty@xxxxxxxxxx/

---
  arch/arm64/boot/dts/mediatek/mt8195.dtsi | 1 -
  1 file changed, 1 deletion(-)

Changes for v2:
  - Add detail description of the tphy design for explaining the reason
    of this change.

diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
index ade685ed2190..1c6f08dde31c 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -1920,7 +1920,6 @@ u3phy1: t-phy@11e30000 {
              #address-cells = <1>;
              #size-cells = <1>;
              ranges = <0 0 0x11e30000 0xe00>;
-            power-domains = <&spm MT8195_POWER_DOMAIN_SSUSB_PCIE_PHY>;
              status = "disabled";
              u2port1: usb-phy@0 {



Thanks!
Macpaul Lin

Thanks!
Macpaul Lin




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux